Andante |
||
|---|---|---|
| #930 | a 38' semi-displacement cruising yacht | Build in STEEL |
| Characteristics | |
|---|---|
| Length overall (on deck) | 38'-5" |
| Length overall (w/transom step) | 39'-9" |
| Length waterline | 36'-0" |
| Beam | 14'-4" |
| Hull draft | 4'-2" |
| Displacement | 29,200 lbs. |
| Hull weight | 12,000 lbs. |
| Freeboard forward | 6'-4" |
| Freeboard aft | 3'-9" |
| Height overall | 15'-9" |
| Headroom | 6'-4" to 6'-6" |
| Fuel capacity | 400 gals. |
| Fresh water capacity | 300 gals. |
| Cruising range (at 8 knots) | 700 miles |
| Sleeping accommodations | 6 |
| Hull type: Semi-displacement, hard chine hull developed for
sheet steel construction (10 Ga. sides, 3/16" bottom). Power: Single diesel motor of 65 to 140 continuous shaft horsepower for 8 to 10 knot speeds respectively, with suitable reduction gear. Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam. |
|
| Photographs | Bill of Materials | Notes | Return |
|---|
Glen-L marine designs / www.glen-l.com / Boat plans for the home builder