Jackknife |
||
|---|---|---|
| #557 | a 14 1/2' outboard cruiser | Build in PLYWOOD |
| Characteristics | |
|---|---|
| Length overall | 14'-6" |
| Beam | 6'-9" |
| Hull draft | 9" |
| Hull depth | 3'-0" |
| Hull weight (approx.) | 600 lbs. |
| Height overall | 4'-5" |
| Cabin headroom | 33" |
| Cockpit size | 6'-3" x 5'-6" |
| Cabin headroom | 33" |
| Sleeping accommodations | 2 |
| Hull type: Full length deep vee with lift strakes, radiused
keel section, and bulbous forefoot, approx. 16o deadrise at the
transom, developed for sheet plywood planking. Power: Single long shaft outboard motor to 75 hp maximum. Minimum engine recommended is 20 hp. Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam. Trailer: Designed for use with Glen-L Series 1000 boat trailer plans. |
|
| Photographs | Bill of Materials | Return |
|---|
Glen-L marine designs / www.glen-l.com / Boat plans for the home builder