Marauder |
||
|---|---|---|
| #884 #885 |
a 44' sport fishing boat | Build in FIBERGLASS or PLYWOOD |
| Characteristics | |
|---|---|
| Length overall | 43'-9" |
| Length waterline | 39'-0" |
| Beam | 15'-2" |
| Hull draft | 3'-0" |
| Displacement | 30,600 lbs. |
| Freeboard forward | 6'-1" |
| Freeboard aft | 3'-9" |
| Hull depth | 9'-1" |
| Height overall | 16'-0" |
| Headroom | 6'-3" to 6'-7" |
| Cockpit size | 10'-0" x 12'-0" |
| Fuel capacity | 450 gals. |
| Fresh water capacity | 200 gals. |
| Sleeping accommodations | 4-6 |
| Hull type: Hard chine hull with built-in spray deflector/hull
stabilizer, convex bulbous deep vee entrance and flaring topsides forward, and
modified vee aft with flatter sections for stability and lower power
requirements. Hull intended for cold-molded multi-diagonal wood or plywood
planking (thickness of 1 1/4" on bottom, 1" on sides), or
"one-off" fiberglass hull construction. Power: Twin inboard in-line engines, either gasoline or diesel powered. Single engine optional, but not detailed. Recommended practical speed range is 15 to 22 knots, although speeds to approximately 28 knots are possible. Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam. |
|
| Photographs | Bill of Materials: Fiberglass / Plywood |
Notes | Return |
|---|
Glen-L marine designs / www.glen-l.com / Boat plans for the home builder