Vera Cruise |
||
|---|---|---|
| #655 | a 21' trailerable family cruiser | Build in PLYWOOD |
| Characteristics | |
|---|---|
| Length overall | 21'-0" |
| Length waterline | 18'-0" |
| Beam | 7'-10" |
| Hull draft | 10" |
| Hull weight (approx.) | 1200 lbs. |
| Hull depth | 4'-3" |
| Freeboard forward | 3'-5" |
| Freeboard aft | 2'-5" |
| Height overall | 7'-3" |
| Cabin headroom | 5'-4" |
| Cockpit size | 5' x 6' |
| Sleeping accommodations | 3 |
|
Hull type: Vee bottom, hard chine hull developed for sheet plywood
planking.
Power: Single or twin short shaft outboard motors. Long shaft motors can be used if transom modified. Optional (not detailed) stern mounted inboard motor to 700 lbs. connected to an outdrive. Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam. Trailer: Designed for use with Glen-L Series 3800 boat trailer plans. |
|
| Photographs | Bill of Materials | Notes | Return |
|---|
Glen-L marine designs / www.glen-l.com / Boat plans for the home builder