Sabotina S&G
Bill of Materials

PLYWOOD & LUMBER: All plywood is 1/4" thick or the nearest corresponding thickness in millimeters. A marine-grade (MAR) panel is best, but an AB-EXT grade of fir will also suffice. Solid wood members can be any mahogany of good grade, 1" nominal stock (often surfaced to 3/4" actual thickness) re-sawn to thicknesses and widths noted. Two sheets of 4' x 8' plywood, and a half-panel 4' square are required.

DRIFT PRAM STITCH-&-GLUE MATERIALS
8' OR 10' MODELS:
ITEM QUANTITY
Stitching wire Approximately 50'
Epoxy resin-hardener 1.2 to 1.5 gal.
Fiberglass cloth tape 30 yards 4" x 6 oz.
Wood Flour
-OR-
Microspheres Filler
Silica Filler 		1 lb.

1 lb.
1/2 lb.


Return