Big Hunk
|
| #650 |
a 26 1/2' power fishing
dory |
Build in PLYWOOD |
| Characteristics |
| Length overall (standard) |
26'-7" |
| Length overall (inboard) |
25'-8" |
| Beam |
9'-8" |
| Hull weight (approx.) |
1800 lbs. |
| Hull depth forward |
5'-2" |
| Hull depth aft |
3'-3" |
| Bottom width |
6'-0" |
| Minimum recommended power |
50 hp |
| Maximum engine/drive weight |
1000 lbs. |
- Power: Single well-mounted outboard standard. Transom mounted single or
twin outboards optional. Short shaft motors not recommended. Inboard driving
through outdrive or jet pump optional.
- Hull type: Flat bottom dory-type hull aft. Developed for sheet plywood
planking with outer rub strakes.
- Can the hull be extended or shortened? Yes. Up to 3' by re-spacing the
frames from the aft end of the stem to the transom a proportional amount, or by
adding an additional frame. We do not recommend increasing the beam.
|
Glen-L marine designs / www.glen-l.com / Boat
plans for the home builder
|