Eagle

#790
#791
a 22' trailerable work lobster boat Build in
FIBERGLASS
or WOOD


Eagle 23' lobster boat



Characteristics
Length overall 22'-0"
Length waterline 20'-0"
Beam 7'-11"
Hull draft (inboard version) 26"
Hull draft (outboard & I/O version) 15"
Displacement 3600 lbs.
Hull weight (approx.) 1000 lbs.
Hull depth 4'-7"
Freeboard forward 3'-6"
Freeboard aft 2'-1"
Height overall 8'-11"
Headroom (cabin) 4'-4"
Cockpit size 12'-6" x 6'-8"
Cockpit depth 2'-0" to 2'-4"
Fuel capacity 80 gals.
Sleeping accommodations 2
  • Hull type: Round bilge hull with flat run aft, skeg, and flaring topsides characteristic of New England lobster boats. Hull can be built in wood using conventional strip planking or cold-molded epoxy strip planked with double laminated wood outer veneer. Alternately, hull may be built in "one-off" fiberglass planking or PVC foam or Balsa-core sandwich construction.
  • Power: Single diesel or gasoline inboard motor, centrally located up to 875 lbs., driving through a straight shaft; or stern mounted motor driving through an outdrive between 400 and 600 lbs. total; or outboard (single or twin) to 450 lbs.
  • Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
  • Trailer: Designed for use with Glen-L Series 3800 boat trailer plans.

Photographs Bill of Materials:
Fiberglass /Wood
Notes Return


Glen-L marine designs / www.glen-l.com / Boat plans for the home builder