Eureka
|
| #794 |
a 26' fiberglass work
boat |
Build in FIBERGLASS |
| Characteristics |
| Length overall |
26'-0" |
| Length waterline |
23'-4" |
| Beam |
9'-10" |
| Hull draft |
3'-6" |
| Displacement |
10,200 lbs. |
| Freeboard forward |
4'-9" |
| Freeboard aft |
2'-11" |
| Height overall (w/o mast) |
11'-0" |
| Headroom (pilothouse) |
6'-3" |
| Fuel capacity |
150 gals. |
| fresh water capacity |
20 gals. |
| Cruising range (approx.) |
1000+ miles |
| Hold capacity |
180 cu. ft. |
| Sail area |
33 sq. ft. |
| Sleeping accommodations |
2 |
- Hull type: Full displacement round bilge hull form with maximum hull speed
of approx. 6 1/2 knots. Designed for "one-off" fiberglass
construction using fiberglass planking or PVC foam sandwich core with
fiberglass laminate.
- Power: Single diesel or gasoline inboard of approx. 15 continuous shp (20
to 30 brake hp) not exceeding 600 lbs. Reduction gear may be required, driving
through straight shaft to 24" max. diameter propeller.
- Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the
frames from the aft end of the stem to the transom a proportional amount. We do
not recommend increasing the beam.
|
Glen-L marine designs / www.glen-l.com / Boat
plans for the home builder
|