Hunky Dory

#651
#652
a 23' power fishing dory Build in
ALUMINUM
or PLYWOOD


Hunky Dory, 23' Pacific power dory



Characteristics
Length overall (standard) 22'-10"
Length overall (inboard) 22'-0"
Beam 8'-0"
Hull weight (approx.) 1000 lbs.
Hull depth forward 4'-2"
Hull depth aft 2'-8"
Bottom width 5'-0"
Minimum recommended power 30 hp
Maximum engine/drive weight 700 lbs.
  • Power: Single well-mounted outboard standard. Transom mounted single or twin outboards optional. Short shaft motors not recommended. Inboard driving through outdrive or jet pump optional.
  • Hull type: Flat bottom dory-type hull aft. Developed for sheet plywood planking with outer rub strakes.
  • Can the hull be extended or shortened? Yes. Up to 3' by re-spacing the frames from the aft end of the stem to the transom a proportional amount, or by adding an additional frame. We do not recommend increasing the beam.
  • Trailer: Designed for use with Glen-L Series 3800 boat trailer plans.

Photographs Bill of Materials:
Aluminum / Plywood
Notes Return


Glen-L marine designs / www.glen-l.com / Boat plans for the home builder