Search found 304 matches

by Tony Hain
Wed Jul 04, 2018 12:52 am
Forum: Hankinson designs
Topic: Tahoe 23
Replies: 228
Views: 56683

Re: Tahoe 23

Well after acouple of months doing house renovations I am back working on the boat and will soon fit the guards, prop strut and rudder log. Have bought a top bearing and safety collar for the rudder and ordered some timber for the deck battens. To all the American members I hope you have a great Ind...
by Tony Hain
Tue Jun 26, 2018 1:15 pm
Forum: Power Boats
Topic: Matt's Geronimo
Replies: 881
Views: 142881

Re: Matt's Geronimo

I was told when doing house renovations you can have it "level" or "look level". Rarely both!
by Tony Hain
Wed Jun 13, 2018 1:01 pm
Forum: New Members, Please Introduce Yourself
Topic: New Riviera build in the Netherlands
Replies: 3
Views: 477

Re: New Riviera build in the Netherlands

Hugo, What I think you will find is that in a lot of these boats the timber listed is a net size but what is used is actually a dressed size unless otherwisw stated. This is what is done in the "Tahoe" plans. So a 2 x 1 inch(50mm x 25mm) timber will end up being 1 3/4 x 3/4 (44mm x 19mm} o...
by Tony Hain
Tue May 01, 2018 12:25 pm
Forum: Power Boats
Topic: Neel's Palm Beach 22 build
Replies: 339
Views: 31159

Re: Neel's Palm Beach 22 build

Pawel,
Available from Glen-L in that size range are plans for the Belle Isle 23, Biscayne 22 and Tahoe 23. Have a look at those if you have not already.
by Tony Hain
Thu Apr 12, 2018 1:35 pm
Forum: Hankinson designs
Topic: Tahoe 23
Replies: 228
Views: 56683

Re: Tahoe 23

Well progress so far. .I have completed the sheer and deck clamp laminations. .Sanded and given the inside of the hull another coat of epoxy. .Made the guards for the sides and encapsulated them ready for fitting to the hull. I am only having guards down the sides. Not around the transom. At present...
by Tony Hain
Thu Apr 12, 2018 1:17 pm
Forum: Hankinson designs
Topic: Key Largo build. Tahmoor (nr. Sydney) Australia
Replies: 32
Views: 3178

Re: Key Largo build. Tahmoor (nr. Sydney) Australia

Rob I would assemble the frames first, then encapsulate. One thing I would do if I were building another boat would be to use filler blocks between the gussets in the bottom corner of the frames. It would just tidy off the frame and where they are exposed make them look more finished. Also you would...
by Tony Hain
Thu Apr 05, 2018 1:24 pm
Forum: Hankinson designs
Topic: Key Largo build. Tahmoor (nr. Sydney) Australia
Replies: 32
Views: 3178

Re: Key Largo build. Tahmoor (nr. Sydney) Australia

Hi Rob I used the Boatcraft Pacific products. I initally used the boat cote for encapsulating and added their thickener for gluing up. I had no issues with the product. But for gluing up I prefer to use their "epox-e-glue" which is a 2 part gel. With the liquid epoxies I find I break into ...
by Tony Hain
Thu Feb 22, 2018 1:35 pm
Forum: Hankinson designs
Topic: Placement of guards on the Tahoe
Replies: 6
Views: 778

Re: Placement of guards on the Tahoe

Yes Bill, all the compound curves are part of the reason I decided not to take the guard across the back, but also I personally have not liked the look of ones I have seen done. Especially when they have been extended to form swimming platforms. It is my intention to have a stainless steel drop down...
by Tony Hain
Thu Feb 22, 2018 12:41 pm
Forum: Hankinson designs
Topic: Tahoe 23
Replies: 228
Views: 56683

Re: Tahoe 23

JohnyJ
That would be fine. I will send you a PM with my contact details so we can arrange a date.
by Tony Hain
Thu Feb 22, 2018 12:37 pm
Forum: Hankinson designs
Topic: Placement of guards on the Tahoe
Replies: 6
Views: 778

Re: Placement of guards on the Tahoe

Thanks Guys. Yes I will run parallel, although it is not my intention to run the guard around the stern, only down the sides.
by Tony Hain
Wed Feb 21, 2018 3:47 pm
Forum: Hankinson designs
Topic: Placement of guards on the Tahoe
Replies: 6
Views: 778

Placement of guards on the Tahoe

So it says to take approximate placement of guards from sheet 1 of plans. On the plans the side guards are not parallel to the waterline but fall about 1 inch from forward to aft. I was going to make them parallel! Does it matter one way or the other?
by Tony Hain
Sat Oct 21, 2017 11:50 pm
Forum: Hankinson designs
Topic: Tahoe 23
Replies: 228
Views: 56683

Re: Tahoe 23

Today I faired the transom. It may need some fine adjustment when I lay the deck battens. Waiting on screws so cannot continue with the deck clamps at the momment. While waiting I can start cleaning up the inside of the hull.
by Tony Hain
Wed Oct 18, 2017 6:27 pm
Forum: Hankinson designs
Topic: Tahoe 23
Replies: 228
Views: 56683

Re: Tahoe 23

Yesterday I finished fairing the sheer clamp so it is parallel to the deck beam. My personal choice of weapon to do the bulk of the fairing is a 4" angle grinder with a 120 grit sanding pad. Down side is it gets pretty dusty. I've tried electric and hand plane but the grinder works for me. Toda...
by Tony Hain
Fri Oct 13, 2017 12:37 pm
Forum: Hankinson designs
Topic: Sydney Barrelback 20'
Replies: 18
Views: 2148

Re: Sydney Barrelback 20'

To raise the deck to allow for thicker cover boards, could you mount the deck battons on the deck beams rather than notched into the deck beams. That would give you 5/8 th of an inch if the battons are the same as the Tahoe.
by Tony Hain
Thu Oct 12, 2017 11:17 pm
Forum: Hankinson designs
Topic: Tahoe 23
Replies: 228
Views: 56683

Re: Tahoe 23

Jenko
Personal experience?

Thanks Tomas.

Go to advanced search