Search found 4223 matches

by kens
Tue Nov 13, 2018 7:21 pm
Forum: Miscellaneous
Topic: How Did You Know?
Replies: 4
Views: 149

Re: How Did You Know?

yeah, done that.
cleaned out the garage of old stuff and come across a drill jig, or, tool, and then wonder what it was......
find a repair on something, something you know nobody else was around. but you can't quite remember.
by kens
Sat Nov 10, 2018 9:03 pm
Forum: Hankinson designs
Topic: Tom's Tahoe
Replies: 129
Views: 18776

Re: Tom's Tahoe

hoodman wrote:
Fri Nov 09, 2018 7:00 pm
That looks incredible. I wouldn't worry about the variability in the color of the planks. It's just the way wood is.
I'm onboard with that also.
it looks like you already got the wood grain to 'pop' and this is only a computer pic.
I would like to see that up close and at the Gathering.
by kens
Tue Nov 06, 2018 3:52 am
Forum: New Members, Please Introduce Yourself
Topic: cracker box
Replies: 3
Views: 398

Re: cracker box

Hello, I'm new to this forum. I'm in the planning stage for my cracker box. I'm looking for anyone willing to give advice on putting a 302 ford in my boat and transmission information. This is a first for me. Looking forward to the adventure! Bryan64 Advise?? Git'er Done !! there is some discussion...
by kens
Sun Nov 04, 2018 7:04 am
Forum: Power Boats
Topic: Neel's Palm Beach 22 build
Replies: 416
Views: 55323

Re: Neel's Palm Beach 22 build

Neel, What genre of instrument panel are you looking to do? Old school guages, or modern? I ask because you already mention some electrical items, thrusters, hatches. If you go with modern instrument, it is possible to have a single LCD display that does engine guages and/or GPS like a touch screen ...
by kens
Sat Nov 03, 2018 8:54 pm
Forum: Boat Power
Topic: Spun prop hub??
Replies: 9
Views: 474

Re: Spun prop hub??

I would not rule out a spun hub.
Do you have another prop, be it correct pitch or not, to compare it to?
by kens
Wed Oct 17, 2018 6:11 pm
Forum: Hankinson designs
Topic: CNC Conversion
Replies: 10
Views: 480

Re: CNC Conversion

Maybe I'm old-school, maybe I'm expecting immediate results, But I have to ask why do guys take a set of plans, and then, try to interject them onto CNC, CAD, or any numerous computer program??? My gosh, the time it takes you to input all the info, then twiddle with it, then fret about it, then cut ...
by kens
Fri Oct 12, 2018 5:22 pm
Forum: Power Boats
Topic: Bolero Build
Replies: 27
Views: 1228

Re: Bolero Build

Well, one thing I have found out, is that you can get different amount of curves, depending on the type of wood you are bending around the chines & sheers. Example: the sheers up front have the most amount of curve in them, therefore, if you bend a solid piece of oak, vs a laminate of layers of maho...
by kens
Fri Oct 12, 2018 2:58 pm
Forum: Power Boats
Topic: Bolero Build
Replies: 27
Views: 1228

Re: Bolero Build

Hi, glad to see someone build one of the 'go-fasts'. The majority of builds here are the small outboards & the tumblehome mahogany runabouts, yes the Bolero and other of the 'cigarette style' are not well represented. They have been built, but just not as many as the others, there are pictures in th...
by kens
Fri Oct 12, 2018 2:33 pm
Forum: Speed and Performance
Topic: The benefits of proper trim
Replies: 6
Views: 1246

Re: The benefits of proper trim

here you go,,, here is proper trim,,,,,, the least wetted surface,,,,,,,,,


https://www.youtube.com/watch?v=1UEETjztLqI&t=15s
by kens
Fri Oct 12, 2018 2:25 pm
Forum: Power Boats
Topic: Tahoe 23 engine/transmission
Replies: 32
Views: 1979

Re: Tahoe 23 engine/transmission

Winterization is just a easy dumb way of replacing manifolds, motor blocks, water pumps, et. al.
by kens
Sun Oct 07, 2018 3:57 pm
Forum: Boat Power
Topic: Mercrusier 140 ,Starts, runs, and dies !
Replies: 8
Views: 595

Re: Mercrusier 140 ,Starts, runs, and dies !

I had that issue and found the throttle return spring was bad. replaced the spring, adjusted the idle, and all was well.
by kens
Sat Oct 06, 2018 1:06 pm
Forum: Boat Power
Topic: Converting an I/O motor to Inboard
Replies: 2
Views: 792

Re: Converting an I/O motor to Inboard

you can read my post in the archive newsletter #56. I converted a 3.0L to a velvet drive, it uses most all the same chevy parts. you can do the same with the V6. your V6 will be easier than my 4cyl project, you can get all the motor mounts for that http://www.glen-l.com/weblettr/webletters-7/weblett...
by kens
Wed Oct 03, 2018 4:02 pm
Forum: Gathering 2019
Topic: G-13 Dates/Hales Bar cabin booking instructions
Replies: 21
Views: 1569

Re: G-13 Dates/Hales Bar cabin booking instructions

Looks like we need a new main topic header for Gathering 2019. It wouldn't let me make one..... I think it is a search engine thing,,,,,,,,,, If a new guy searched this site for "g-13" he would get this topic, but, if the new guy searched "gathering 2019" he would get nothing. G-13 and Gathering 20...
by kens
Tue Oct 02, 2018 4:35 pm
Forum: Trailers and trailering
Topic: Rollers or Bunks for Flats Flyer
Replies: 7
Views: 1536

Re: Rollers or Bunks for Flats Flyer

I had a roller trailer once, and never again.
Well, rollers up front on the winch stand I use well,
But rollers on the main hull and aft, no.
by kens
Mon Oct 01, 2018 6:41 pm
Forum: Painting
Topic: Applying epoxy in deep holes
Replies: 2
Views: 402

Re: Applying epoxy in deep holes

I used a piece of rope saturated with resin, and pulled it thru the hole.
also made a dowel rod with cut grooves around it, sort of like a honey dipper, and wipe the hole with it.