Search found 911 matches

by Mr Hot Rod
Sun Aug 05, 2018 11:31 am
Forum: Boat Power
Topic: Intake Strainers
Replies: 24
Views: 2555

Re: Intake Strainers

Another item we've added is a check valve installed on the sea strainer outlet port. This keeps the cam-drive water pump's inlet hose from losing water. With water behind the inlet and outlet ports, the pump is always primed and reduces the risk of running a dry pump. Bronze Check Valves ● GROCO Bro...
by Mr Hot Rod
Sun Aug 05, 2018 10:33 am
Forum: Painting
Topic: Let's demystify some of these boat finishes
Replies: 58
Views: 16363

Re: Let's demystify some of these boat finishes

You might consider a single part solvent-based paint such as RUST-OLEUM's Marine line of paints. Primer, topsides and bottom paint. Follow the link below for more info. ● Rustoleum Boat Paint ● RUST-OLEUM Marine Coatings (rustoleum.com) An air-supplied mask is a great investment. Not only does it en...
by Mr Hot Rod
Mon Jul 30, 2018 11:22 am
Forum: Painting
Topic: knowledge Base - Buffing
Replies: 0
Views: 145

knowledge Base - Buffing

This post is another in the 'Knowledge Base' series. The intent is to create an index to useful posts which would be of general interest. Post any useful links from other topics on the Forum or write a post to cover a particular topic. Buffing varnish and clear coats • The Warmth & Beauty of of...
by Mr Hot Rod
Mon Jul 30, 2018 11:09 am
Forum: Painting
Topic: Let's demystify some of these boat finishes
Replies: 58
Views: 16363

Re: Let's demystify some of these boat finishes

My previous post covered most of these questions. I've expanded and moved the post to the Painting topic : Knowledge Base - Painting Hope this helps ! ____________________ Paul Kane Kane Custom Boats Ltd. Chelsea, Quebec Building the Glen-L Hot Rod : http://www.kanecustomboats.com Glen-L Hot Rod bui...
by Mr Hot Rod
Mon Jul 30, 2018 10:57 am
Forum: Painting
Topic: Knowledge Base - Automotive Paints
Replies: 1
Views: 474

Knowledge Base - Automotive Paints

http://www.glen-l.com/phpBB2/viewtopic.php?p=202206#p202206 ---------------------------------------------------------------------------------------------- This post is another in the 'Knowledge Base' series. The intent is to create an index to useful posts which would be of general interest. (Note t...
by Mr Hot Rod
Fri Jul 27, 2018 5:01 am
Forum: Upholstery
Topic: Support Knowledge Base - Upholstery
Replies: 1
Views: 483

Support Knowledge Base - Upholstery

Post any useful upholstery links from other topics on the Forum to this thread. (1) Seat Design / Hercdrvr : http://www.glen-l.com/phpBB2/download/file.php?id=23628&t=1 ● Malahini Seats (2) Hot Rod Seats - Adjustable seats, webbing & slip-on seat covers / Mr Hot Rod http://www.chelseacoachwo...
by Mr Hot Rod
Fri Jul 27, 2018 4:39 am
Forum: Miscellaneous
Topic: Boat video directory
Replies: 27
Views: 4519

Re: Boat video directory

@Bill & Kens : Thanks guys ! I hope we can make it ... @Neel : Looking forward to sitting on the porch having a beer ... or two ... Don't forget to bring a slalom ski and a rope. I want to see you up on water skis ! @Billy C : Glad you enjoyed the links ! @Bryan : Thanks for the video link. We'v...
by Mr Hot Rod
Wed Jul 25, 2018 6:43 pm
Forum: Miscellaneous
Topic: Boat video directory
Replies: 27
Views: 4519

Re: Boat video directory

It's been a while since the last update ! We've been busy block sanding the Hot Rod's deck and fixing up some dock rash while listening to some inspirational music. We may make the Gathering this year ... I thought we'd share the playlist. Danielle Nicole Band, Joe Bonamassa, Beth Hart, BB King. We'...
by Mr Hot Rod
Fri May 04, 2018 7:30 pm
Forum: Miscellaneous
Topic: Build a Gantry?
Replies: 20
Views: 3199

Re: Build a Gantry?

Here's some inspiration if you decide to build a gantry ... We designed and built a portable gantry to move the boat from its cradle to the trailer. The 6" wide x 12' long I-beam is supported by jackposts which adjust from 7' to 9' in height. The 3" C-channel base is supported by 8" s...
by Mr Hot Rod
Thu Mar 29, 2018 6:25 pm
Forum: Small outboards
Topic: UK Zip Build
Replies: 81
Views: 11217

Re: UK Zip Build

I'm a bit late to the party, but here's a link to a thread which might be of interest : http://www.chelseacoachworks.com/images/misc/engines/shortened_outboard_2.jpg Little Fellow by Bob Ruskauff, Mechanix Illustrated Converting an outboard engine to an inboard Hope this helps ! ____________________...
by Mr Hot Rod
Tue Jan 16, 2018 9:17 pm
Forum: Power Boats
Topic: Just curious?......
Replies: 11
Views: 991

Re: Just curious?......

The following link might be of interest : Belle Isle - Stern Drive? If the hull you're starting with was designed for a centrally mounted inline inboard, you'll have to add a jackshaft extension kit to maintain the original hull's balance. Glen-L's Inboard Hardware Catalog has very competitive prici...
by Mr Hot Rod
Fri Dec 08, 2017 8:27 pm
Forum: Power Boats
Topic: Grounding Aluminum Gas Tanks
Replies: 25
Views: 8604

Re: Grounding Aluminum Gas Tanks

Here's a link to show how we installed our aluminium fuel tanks using David Pascoe's method : Re: fuel tank questions http://www.chelseacoachworks.com/images/hot_rod/300/jumpseats_24.jpg http://www.chelseacoachworks.com/images/hot_rod/300/jumpseats_28.jpg http://www.chelseacoachworks.com/images/hot_...
by Mr Hot Rod
Mon Nov 06, 2017 10:26 pm
Forum: Power Boats
Topic: what's that speckle paint ?
Replies: 5
Views: 700

Re: what's that speckle paint ?

Here's a link to Valspar Zolotone : http://www.quest-ip.com/trusted-brands/zolatone/ -> Click on Zolotone MSDS for sample colours. Try a Google Search with the search term Zolotone or look for it at major automotive refinish retailers. ____________________ Paul Kane Kane Custom Boats Ltd. Chelsea, Q...
by Mr Hot Rod
Wed Sep 27, 2017 5:57 pm
Forum: Design Modifications
Topic: Making a monto Carlo wider
Replies: 17
Views: 2375

Re: Making a monto Carlo wider

You may leave the beam as is but stretch the boat to accomodate a staggered engine configuration. The engines could mount to remote v-drives located just behind the cockpit. One engine would be closely coupled while the other engine would be coupled by a torque tube which parallels the first engine ...
by Mr Hot Rod
Wed Sep 27, 2017 5:04 pm
Forum: New Members, Please Introduce Yourself
Topic: Dream Builder
Replies: 16
Views: 1884

Re: Dream Builder

What does this number mean exactly? As in, the stern will sit 4 inches lower? 1) Add the weights of all objects. Add the weight moments. 2) Divide the total moment by the total weight. This is the distance from the datum to the center of gravity. Here are some links to augment Bill's post : → For a...

Go to advanced search