Glen-L.com

well im going to have to disagree with you about chrysler caber, i drive an 89 dodge ram and i wouldnt trade it for anything, i paid 1800 for it 2 years ago and a couple months ago i had a guy offer me 2500 CASH for it, i turned him down, i love my dodge truck! my mom drives an 85 ram, my grand fath...

believe it or not caber, that old chrysler 105 runs suprisngly well for its age, dont know how well it does in the water, hopefully going to drop it in the water tomorrow and see how it does. also, what would you hook the tach up to? the negative on the coil? or the tach hook up on the wire block? p...

well now, lets make it real interesting with this i have a 1967, 4 cylinder, 2 stroke, chrysler outboard, WITH a distributor, breaker points, and a single coil. now, in theory, couldnt i get an automotive tach, set it to 8 cylinder and it read accurately? in theory, a 2 stroke fires twice as often a...

lol, smart man!

i had to pull the flywheel off to change the timing belt, i cleaned the points today, get em to fire, the plugs fire, and i actuallygot it to crank a few times!

GOT IT!!!!! it faught me every step of the way, but i got that sun of a beeotch, it took wedging a thick chisel under the rear, a pry bar in the front, a propane torch to get it red hot, put a ball peen hammer on crank shaft, and slammed it with a 3 pound mall, bout 10 solid hit, and it popped! when...

thanks dan, i appreciate the effort buddy, its just getting disheartening to not get this thing off

tried that with the second and third puller, and again now that its suspended in the air, no such luck, tomorrow im going to get some PB blaster and let it soak for a while

ok, so new strategy, ive got the whole thing suspended about 2 inches about the trailer, bieng held up by a motor hoist, and its connected to the flywheel.

still hasnt budged but ill let it sit there and soak untill its learned its lesson!

well, it helped a little, Dan, but still doesnt tell me if there is anything else that holds the flywheel down, i dont see anything in my partial repair manual, but this damn thing just wont come loose

i wish someone knew, im in a bad way with this motor, i really want to get this old motor runnin to keep with the classic look, but geez this thing is giving me hell

do you pull the flywheel off a chrysler 105 outboard, i took the nut off the top, sprayed plenty of lube on it, and so far ive broken 2 cast aluminum harmonic balancer pullers, and snapped a grade 8 bolt, and havent gotten this thing to budge. is there something im missing? someone please help me, i...

yeah how do they rig up those side pipes, ive always been curious about that, ive seen pictures of them before and the look cooler than hell, ive seen pictures of chryslers like the one that on my glastron and wondered what they did or how they did it like this http://www.hydrostream.org/Literature/...

well everybody, i decided today when i went look at the motor it was hooked on to a 17 foot glastron boat, transom needs work so the guy was going to sell the motor, scrap the boat, and keep the trailer so i bought the boat and the motor for 60 bucks, yes 6-0 dollars, and ive already got a trailer a...

well i was looking at a 55hp chrysler, but this motor came up and i cant pass it up

67' 105hp chrysler 60 DOLLARS!!! AND IT RUNS!!!!

called the guy a few minutes ago, going take a look at it tomorrow!

ive heard since their not thru prop exhaust they are prone to shearing the key in the prop easily, and their not that good of motors. anybody had any experience with them, im thinking about re-powering my aluminum fishing rig with a 1975 55hp chrysler and using my 70hp johnson for my outrage project...