Glen-L.com

Thanks ,Bill and Steve.My main concern was the length and size of wire to circuit breakers from batteries(about 15 ft).dash switches have fuses on panel.was thinking on running heavy wire from battery switch in rear up to the pos and neg busbars .then smaller wire to each panel then off to loads.Hav...

I know it's probably overkill. positive busbar will have anchor winch and fuse panels and switches for everything.got alot of smaller wire(mostly duplex)in various sizes for bilge pumps,horn ,lights and other.thanks for the chart.(not sure I understand it tho)

Am using size 2 welder ground wire for common ground to forward busbar.wanted bigger red for primary.site I was looking at ,mentioned 0.thought 1/0 would work.just don't want to have problems.Curious what Bill used on his Bartender.

is 1/0 wire big enough for primary from battery 7 ft for'ward to 150 amp breaker ,then another 7 ft to for'ward busbar? Was looking for 0 size but had to go bigger.

Good to hear.can't wait til you're in the wiring stage.I got a 25 ft chunk coming tomorrow-126 bucks.Yikes

should stop and check for trailer hitch on the Bently.that would look cool dragging your Bartender.

Wow ! that's nice.kinda similar to my Bo.Yours is on the top of the spectrum and mine is on the crappy end

sorry about the stones too.I've been "stoned" a few times too.even had bladder stones too.When I saw the pics ,thought I was growing another set of teeth in there.

Well,I built an 18ft longx 8 ft wide Bo-jest in a 12x 24 ft shed.Its tight but leaving wall studs exposed helped with some clamping issues.Also had higher ceiling rafters to lift hull from(2x10 rafters)

how about one of these rubber transom pads? I'm gonna order one for my boat- about 32 bucks Jamestown big book page1176

Carl. Are the cabin sides straight? or will they be slightly curved?

I'm trying a hunter green hull using latex house paint.might have change to yellow so I might have a "Yellow submarine"

kinda like pic 3 of Robert Schmitz's squirt build in The Glen-L Boatbuilder's Gallery .

Hey,I got one of those! I noticed that sawdust will get in bottom of slot and one won't be able to tilt back up 90 degrees.I just use mine with 1/2 " blade for quick cut off.

you wouldn't have to worry about backing up-just turn the motor-still going for'ward.might have to have nav lights on a turntable on top