Search found 1168 matches
- Sun Jul 15, 2018 1:43 pm
- Forum: Power Boats
- Topic: Building The Vera Cruise
- Replies: 2368
- Views: 319709
sorry about the stones too.I've been "stoned" a few times too.even had bladder stones too.When I saw the pics ,thought I was growing another set of teeth in there.
Well,I built an 18ft longx 8 ft wide Bo-jest in a 12x 24 ft shed.Its tight but leaving wall studs exposed helped with some clamping issues.Also had higher ceiling rafters to lift hull from(2x10 rafters)
- Mon Jul 09, 2018 5:16 pm
- Forum: Design Modifications
- Topic: TrueGrit/Coastal Cruiser Walkaround
- Replies: 51
- Views: 4589
Hey,I got one of those! I noticed that sawdust will get in bottom of slot and one won't be able to tilt back up 90 degrees.I just use mine with 1/2 " blade for quick cut off.
- Mon Jul 09, 2018 9:01 am
- Forum: Miscellaneous
- Topic: Wake board tower questions
- Replies: 19
- Views: 379
:D maybe a small outboard mounted in the middle.one of those older motors that swing all the way around for steering.Hurry up and build it so I'll have something to go by :D speaking of pink flamingoes,our school kids had a good way to make money for school trip-they were professional flamingo remov...
Been trying to wire the boat.Had to figure out where to put the 2 batteries.Finally settled on a sliding drawer under the motor.not too fancy but battery switch will mount on front and will be recessed enough so won't catch on anything.
:D Added a 110 buck chunk of bronze to "Chugs" hull today.was uneventful-drill 1-1/4" hole through hull,sand out a little,apply epoxy mix liberally to ply edges and thickened epoxy to fitting and assemble. IMG_1029.JPG now I have to get screen from faucet to stuff in drain.getting ...