Search found 1187 matches
Nice to see the boat up and running.coulda tried dowel centers(little metal inserts into dowel holes)Looks like you did good tho.How is the glass mounted in frames?I had to assembly my frames and glass at same time.
- Thu Aug 16, 2018 5:40 pm
- Forum: New Members, Please Introduce Yourself
- Topic: Malahini Bow Rider porpoising
- Replies: 11
- Views: 524
:D Just cause you have a 26 gal tank,doesn't mean you have to have that much in there.try it with less fuel and motor trimmed in a little.or add electric trolling motor and battery up forward.(Kinda like my newest donor boat-1700 Monark fishing boat with 90 merc.)I open it up tucked all the way in, ...
:roll: Sorry got confused on rope-Canadas rule is 49 ft of rope and anchor or secondary means of travel(paddle or oars)Mn.didn't say ,however a paddle is handy. I got my registration when I went in to DMV.then had to send to state for HIN.funny,the guys at state said only they could assign reg # wit...
- Sat Jul 21, 2018 5:39 pm
- Forum: Power Boats
- Topic: Building The Vera Cruise
- Replies: 2440
- Views: 354402
is the water for drinking or dishwater?I'm going with large water containers from store for drinking and seperate water tanks for wash and grey water.maybe 5 gal jerry cans.
The Starting battery and the house battery go to battery switch first .then common battery + cable goes to 150 amp breaker mounted near batteries,then off to + busbar mounted on back of steering bulkhead.
Thanks ,Bill and Steve.My main concern was the length and size of wire to circuit breakers from batteries(about 15 ft).dash switches have fuses on panel.was thinking on running heavy wire from battery switch in rear up to the pos and neg busbars .then smaller wire to each panel then off to loads.Hav...