Search found 123 matches

by John R
Fri Feb 09, 2018 5:06 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

001p.JPG

002p.JPG

003p.JPG
by John R
Fri Feb 09, 2018 5:04 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well more done on the deck dash and engine bay b/head in starting to plank the top made some cleats to go between to hold the wiring and pitot tube and also doing the steering cables and pulley's, fitted the front bridge i will remove the to epoxy underneath and also the deck, trial fitted the...
by John R
Tue Feb 06, 2018 9:58 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well finished the fore deck now to sand it and seal it with epoxy primer, now making all the cross beams and dash ....John
003v.JPG

001v.JPG

006v.JPG
by John R
Sat Jan 13, 2018 3:50 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well first coat of epoxy went on this is the first of 6 coats as this seals the timber and makes it stable while i do the other side then when most of the deck is done (except the hatch) it will get 12 coats of varnish.....John
0011 (1).JPG

0011 (3).JPG

0011 (4).JPG
by John R
Fri Jan 05, 2018 3:14 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well finished half the fore-deck now lots of sanding to do, then turn the boat around and do it again ......John
1.JPG

2.JPG

4.JPG
by John R
Fri Dec 29, 2017 3:49 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

Gentry 2.JPG

gentry c (1).JPG

gentry d.JPG
by John R
Fri Dec 29, 2017 3:47 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well started on the straight planking on the deck and i have raised it slightly to enhance the timbers i am using Sapele and Silver Ash strips between slow process keep having to make Alu extensions for the clamps............ John
001z (3).JPG

001zx (1).JPG

001zzzz (2).JPG
by John R
Sun Dec 03, 2017 1:46 am
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well finally finished the Mahogany and Silver Ash strips now a bit of sanding and start the straight planking .....John
3a.JPG

2a.JPG

1a.JPG
by John R
Sat Oct 14, 2017 3:40 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well got a second deck plank on came in pretty good using Alu strips to hold it down and the clamps to pull tight .....John
007.JPG

008.JPG

012.JPG
by John R
Thu Oct 05, 2017 2:01 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well Silver Ash king plank is glued on also flat bent 20 mm by 10 mm Mahogany around the gunnel edge, no cracking so i was pretty happy this one will be screwed to hold in place while glue cures then i will remove and plug the rest of the strips (silver ash and mahogany) will be clamped pulled...
by John R
Tue Oct 03, 2017 3:11 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well i got the base ply deck glued and on now the fun begins with the Mahogany and Silver Ash ....John
IMG_7494.jpg

IMG_7490.jpg

IMG_7492.jpg
by John R
Tue Aug 29, 2017 4:00 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

IMG_7400.jpg

IMG_7409.jpg

IMG_7410.jpg
by John R
Tue Aug 29, 2017 3:58 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well put the dummy engine in to start to line the drive train up and make the engine mounts also got the front deck stringers on and faired.....John
IMG_7407.jpg

IMG_7401.jpg

IMG_7402.jpg
by John R
Tue Aug 22, 2017 3:27 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

IMG_7397.jpg

IMG_7393.jpg

IMG_7395.jpg
by John R
Tue Aug 22, 2017 3:25 pm
Forum: Power Boats
Topic: Aussie Gentry
Replies: 201
Views: 53472

Re: Aussie Gentry

G/Day well swim step is on for good and finished also put the exhaust outlet on and fitted, now making the inlet manifold for the engine this will take 2 40mm DLOE Weber carburetors all fun stuff now ............John
IMG_7389.jpg

IMG_7387.jpg

IMG_7388.jpg

Go to advanced search