Search found 4 matches

by DaveM
Mon Aug 13, 2018 5:04 pm
Forum: Hankinson designs
Topic: Tahoe 23 Prop Shaft Diameter?
Replies: 14
Views: 4644

Re: Tahoe 23 Prop Shaft Diameter?

Your question regarding shaft log requirement. My plans call for a 13.75 (say 14) degree strut with the propshaft and motor at 12 deg.. My thinking was the strut is a 14 deg. from keel, the 12 deg. reference is motor and prop shaft from motor stringers.
by DaveM
Sun Aug 12, 2018 7:10 pm
Forum: Hankinson designs
Topic: Tom's Tahoe
Replies: 410
Views: 132351

Re: Tom's Tahoe

Your planking looks good, your method and installation is very similar to what I have done on a Tahoe 23. It is nice to have gravity help. One thing I found interesting was that my butt joints on the bow sections had to be visually squared for appearance, meaning put it on - stand back and look - ok...
by DaveM
Sat May 13, 2017 7:01 am
Forum: Hankinson designs
Topic: Tom's Tahoe
Replies: 410
Views: 132351

Re: Tom's Tahoe

I am also working on a tahoe 23 and it will have a 9 inch rudder post, your numbers are the same as mine. Thankyou. The top rudder bearing is mounted in 3 X 1 inch aluminum channel fastened to the stringers and I have eliminated the safety collar, instead I have drilled and tapped the rudder post en...
by DaveM
Tue Apr 26, 2016 5:16 pm
Forum: New Members, Please Introduce Yourself
Topic: Canadian Tahoe Builder
Replies: 1
Views: 689

Canadian Tahoe Builder

I have frequented this site reviewing the talented builders projects. My Tahoe 23 build started about a year ago, but I had purchased the plans many years ago just before Ken Hankinson retired. It was my leaving the 9 to 5 lifestyle and this site that got it going again. I am located in St George On...

Go to advanced search