Search found 18 matches

by cssh
Sun Apr 15, 2018 7:58 pm
Forum: Power Boats
Topic: Routing rebate into timber corner monaco
Replies: 7
Views: 556

Re: Routing rebate into timber corner monaco

Thanks for the comments. I'm looking at putting a more rounded edge than the suggested method allows. This is my idea i'm going with : stern STERN SHEER.jpg bow BOW SHEER.jpg I will be screwing and plugging the wood, then blending the sides to the top as i go along. The deck is lined in 2 sheets of ...
by cssh
Mon Apr 09, 2018 6:15 pm
Forum: Power Boats
Topic: Routing rebate into timber corner monaco
Replies: 7
Views: 556

Re: Routing rebate into timber corner monaco

Perfect
that's the info i'm after,
approximately how far down and in did you cut, i'm scared to go too far.
thanks
Chris
by cssh
Sun Apr 08, 2018 6:34 pm
Forum: Power Boats
Topic: Routing rebate into timber corner monaco
Replies: 7
Views: 556

Routing rebate into timber corner monaco

Hi all,
i'm at he point where i need to router a rebate into the plywood edge of my monaco to glue in some mahogany so that i can round the corner over.
Does anyone have an tips or pictures they can send me as i really dont want to make a mess of this.
thanks
chris
Sydney Australia
by cssh
Sun Jan 07, 2018 2:07 pm
Forum: Power Boats
Topic: 71c Velvet drive issues
Replies: 6
Views: 526

Re: 71c Velvet drive issues

Thanks for the feedback guys.
its a 1:1 unit, pretty old from looking at parts, but in very good condition.
I have studied the online manuals to see if i'm doing something wrong but still confused.
Il keep trying and post if i find my problem.
thanks
chris
by cssh
Thu Jan 04, 2018 8:56 pm
Forum: Power Boats
Topic: 71c Velvet drive issues
Replies: 6
Views: 526

71c Velvet drive issues

Good morning all. I've been sorting my trans for the past 6 months and i have run out of things to check. After a rebuild my box is jammed in reverse and will not sit in neutral. It only locks up with around 1mm left to tighten the reverse end plate, before it goes tight it sits in neutral. Im out o...
by cssh
Tue Sep 12, 2017 4:26 pm
Forum: Power Boats
Topic: Interior Hull Finish
Replies: 5
Views: 999

Re: Interior Hull Finish

thanks for the input
makes sence to me, i was just trying to avoid hand painting the hull in epoxy.
by cssh
Tue Sep 12, 2017 3:17 pm
Forum: Power Boats
Topic: Interior Hull Finish
Replies: 5
Views: 999

Interior Hull Finish

Hi all, need some guidance regarding the finish on the inside of my Monaco Utility. All of the surfaces on the inside are going to be covered so aesthetically i'm not picky. My idea was to spray 2 coats of 2 pac primer directly onto the raw timber to seal it, then paint in white 2 pac. I'm open to a...
by cssh
Sun Jul 16, 2017 8:43 pm
Forum: Power Boats
Topic: Monaco Splash rail position
Replies: 4
Views: 558

Re: Monaco Splash rail position

Thanks thats exactly the info i was after.
Time to cut some timber.
thanks
chris
by cssh
Sun Jul 16, 2017 7:36 pm
Forum: Power Boats
Topic: Monaco Splash rail position
Replies: 4
Views: 558

Monaco Splash rail position

Hi all, I'm embarking on making the splash rails for my Monaco and i have a few questions. - Position I was thinking of putting them inline with where the hull goes vertical on the sides. To add to this i am also in 2 minds as to position them parallel to the paint line on the side, of parallel to t...
by cssh
Mon Feb 20, 2017 5:49 pm
Forum: Power Boats
Topic: Paint line calculation
Replies: 8
Views: 1357

Re: Paint line calculation

il get the water level out tonight and confirm my measurements.
thanks all for the input
by cssh
Sun Feb 19, 2017 7:01 pm
Forum: Power Boats
Topic: Paint line calculation
Replies: 8
Views: 1357

Re: Paint line calculation

My plan is to glass and paint under the water line, and on the sides and transom epoxy and automotive clear, which i'l do once the boat is complete.
by cssh
Sun Feb 19, 2017 6:49 pm
Forum: Power Boats
Topic: Paint line calculation
Replies: 8
Views: 1357

Re: Paint line calculation

I have the plans at home, but i'm unable to find that piece of information.
I was more after advice one how others had gone about doing it properly
by cssh
Sun Feb 19, 2017 5:42 pm
Forum: Power Boats
Topic: Paint line calculation
Replies: 8
Views: 1357

Paint line calculation

Hi all, i'm in need of the brains trust again. I purchased my Monaco without plans, so i'm using the site for most of my info, however i'm unable to find a definitive answer on how to locate, measure and mark out the paint line on the hull. Its currently upside down awaiting fibreglass and i'm looki...
by cssh
Tue Feb 14, 2017 5:31 pm
Forum: Power Boats
Topic: Fuel tank locations
Replies: 7
Views: 1539

Re: Fuel tank locations

Thanks for the help guys.
As it happens i make hoses and fittings so that side of it isn't an issue.
Is there an advantage in keeping weight lower in a hull, stability etc?
thanks
chris
by cssh
Thu Feb 09, 2017 8:33 pm
Forum: Power Boats
Topic: Fuel tank locations
Replies: 7
Views: 1539

Fuel tank locations

Hello all from down under, I'm in need of some tank positioning information for a monaco, if there are any experts available. Im looking at routing the exhaust pipes on the inside of the rails and exiting closer to the centre. This leaves me with a lot of extra space on the outside rear of the monac...

Go to advanced search