Search found 116 matches

by Conrad
Fri Feb 01, 2019 10:02 pm
Forum: Hankinson designs
Topic: FF in Kathleen GA
Replies: 130
Views: 30053

Re: FF in Kathleen GA

So, we've had some massive water damage in the house and my wood working business has been keeping me super busy as well. On top of all that, I am heading on a quasi deployment to SC and haven't gotten the flyer where I want her before I move her. That being said, I am super close to putting the fir...
by Conrad
Sat Oct 20, 2018 8:02 pm
Forum: Hankinson designs
Topic: 20ft Texas Barrel
Replies: 410
Views: 69696

Re: 20ft Texas Barrel

Hercdrvr wrote:appropriate forward, aft and vertical restraint straps for the 4 hour drive home.
Matt B
Haha...I get that reference...
by Conrad
Sat Oct 20, 2018 12:51 am
Forum: Hankinson designs
Topic: Flats Flyer Build in Panama City FL
Replies: 141
Views: 54655

Re: Flats Flyer Build in Panama City FL

tcough wrote:We made it out with no injuries but the house took a hit. Not as bad as some, but insurance will take care of what needs to be fixed.

Thanks to all who checked on us.
I just got back from PC today. Went down to clean up trees for some friends. You guys took quite the beating
by Conrad
Fri Oct 12, 2018 7:34 am
Forum: Hankinson designs
Topic: Flats Flyer Build in Panama City FL
Replies: 141
Views: 54655

Re: Flats Flyer Build in Panama City FL

How did you fair down in PC??
by Conrad
Mon Oct 08, 2018 6:44 pm
Forum: Hankinson designs
Topic: FF in Kathleen GA
Replies: 130
Views: 30053

Re: FF in Kathleen GA

Well, here is the proposed fix for the chine logs...havent glued them on yet, I'll set them in tomorrow, but it should allow for the angle fix once shaved down properly.
by Conrad
Mon Oct 08, 2018 11:56 am
Forum: Hankinson designs
Topic: Double layer ply vs single...
Replies: 7
Views: 1638

Re: Double layer ply vs single...

Bill Edmundson wrote:The 1/2" will be very difficult to bend.

Bill

Like the last flyers, would be half to the bend and then 1/4.
by Conrad
Mon Oct 08, 2018 11:07 am
Forum: Hankinson designs
Topic: 20ft Texas Barrel
Replies: 410
Views: 69696

Re: 20ft Texas Barrel

Hercdrvr wrote:C-130’s and KC-135’s
Filling the glass now with a couple more coats of epoxy. Silver tip is a very nice product for wetting out 6 oz cloth, it flows well.
Matt B
Nice! I was a boomer out of the 93rd for a couple years before I flipped to the dark side
by Conrad
Mon Oct 08, 2018 11:05 am
Forum: Hankinson designs
Topic: Double layer ply vs single...
Replies: 7
Views: 1638

Double layer ply vs single...

Double layer ply vs single... So the bottom of the flyer asks for 2 layers of 1/4 instead of 1 of 1/2. I know the question has been asked of some, but to get a fresh opinion, which is better? On the one hand, there are no single points of weakness in the hull as 1/4 is offset from the second, but on...
by Conrad
Sun Oct 07, 2018 3:13 pm
Forum: Hankinson designs
Topic: FF in Kathleen GA
Replies: 130
Views: 30053

Re: FF in Kathleen GA

To expand the question...screws between keel and sheer clam laminations (#8 @ 6"?), and then more screws through the hull layers and the laminations (#8 @ 3"?)...that's a lot of screws, why? Answered as if I was the designer...If there is a little weakness in the woodgrain in one layer or another, ...
by Conrad
Sun Oct 07, 2018 12:27 pm
Forum: Design Modifications
Topic: TrueGrit/Coastal Cruiser Walkaround
Replies: 57
Views: 16116

Re: TrueGrit/Coastal Cruiser Walkaround

Joe,

Have you been able to start yet?

-John
by Conrad
Sun Oct 07, 2018 11:17 am
Forum: Hankinson designs
Topic: FF in Kathleen GA
Replies: 130
Views: 30053

Re: FF in Kathleen GA

If the keel is laminated with epoxy...why would you need screws from the bottom?
by Conrad
Sat Oct 06, 2018 8:47 pm
Forum: Hankinson designs
Topic: FF in Kathleen GA
Replies: 130
Views: 30053

Re: FF in Kathleen GA

So, I came into a ton of walnut, oak, mahogany, and maple for 400$...thoughts on doing a portion of the bow and stern decking in a criss craft style with mahogany?
by Conrad
Fri Oct 05, 2018 7:02 am
Forum: Trailers and trailering
Topic: Rollers or Bunks for Flats Flyer
Replies: 7
Views: 3352

Re: Rollers or Bunks for Flats Flyer

Thanks everyone!
by Conrad
Tue Oct 02, 2018 5:38 pm
Forum: Hankinson designs
Topic: FF in Kathleen GA
Replies: 130
Views: 30053

Re: FF in Kathleen GA

neel thompson wrote:Conrad... I think you hit the jackpot on that trailer.... As Matt said, convert to bunks as rollers will sink into your wood hull. I sold a set of rollers like yours (only not as nice) for $200 one time on craigslist.
Thanks...I'm about 30% concerned that it was stolen... :lol:
by Conrad
Tue Oct 02, 2018 9:08 am
Forum: Trailers and trailering
Topic: Rollers or Bunks for Flats Flyer
Replies: 7
Views: 3352

Re: Rollers or Bunks for Flats Flyer

After that, composite or wood? Anyone try both? The obvious goal would be not to replace the wood boards