Glen-L.com

I'm using pvc pipe for my drain tubes ...can I use epoxy to seal and glue them in?

I'm back..........LIFE got in the way but I'm ready to fight back !!!........

Something isn't right there.

thx

hi all ! I'm looking for a 8 or 10 inch bow eye the longest I have found is only 6 inchs and its to short and wont go though the breasthook. I thought of cutting the breasthook down but don't like that idea. thanks

But thank you .

I have drilled holes already ..I think if I slather in the holes with epoxy and cote the tubes also n insert them the ply will be sealed from water.

Your boat is 90 % covered though.

Still not sure if I want drains or not

A zip is all most covered my boat is completely open ! what about a portable 12 volt water pump to suck up what the bildge pumps don't get? still going back in forth about putingt drains in.

Im building the little hunk dory ...a completely open boat 21 ft ....7 1/2 ft beam and if I have 3/4 inch of water that's about 40 gallons.i know nothing about bilge pumps can you install them to work with lower water levels than 3/4 inch? O I used my shopvac to suck out rain water that's how I know...

Hi,My transom is 2 1/4 inch thick but on the bottom I put 2 -1inch boards so on the bottom is 4 and 1/4 .im worried about sealing that up for some drains.(( Do I Even need drain holes ???)) im going to have 2 Bilge pumps..........thx

yes 3.6 feet

If I buy a top mount throttle can I use the same cables?

A little paint....haven't been feeling well ...not quitting.