Search found 125 matches

by 283
Fri Mar 15, 2019 5:39 am
Forum: Small outboards
Topic: Fisherman
Replies: 94
Views: 10509

Re: Fisherman

epiziali wrote:
Thu Mar 14, 2019 6:30 pm
Pic of gap
Hard to say from looking at pics. But I think a shim added to fill that gap is a good idea...if it isn’t it’s easy to to plane it back off.


...Looking good.
by 283
Thu Mar 14, 2019 11:33 am
Forum: Power Boats
Topic: Boat Show 2019
Replies: 25
Views: 2385

Re: Boat Show 2019

https://www.fellmarine.com/landingpage5/

Fell marine MOB+

Everyone on the boat has a wrist band. If anyone falls off an alarm is sounded and the engine is killed. The engine can be restarted after Something like 10 or 15 seconds.
by 283
Sun Mar 03, 2019 9:41 am
Forum: Power Boats
Topic: Boat Show 2019
Replies: 25
Views: 2385

Re: Boat Show 2019

Bill Edmundson wrote:
Sun Mar 03, 2019 7:43 am
Why do you need over 1000 HP on the boat that is pulled by a truck with maybe 200 HP?

Bill
You haven't been truck shopping lately. :wink:
by 283
Wed Feb 20, 2019 4:25 pm
Forum: Small outboards
Topic: SLX 3 build
Replies: 25
Views: 3966

Re: SLX 3 build

Looks good. Your sketch reminds me off this boat

E8764E23-1D40-4A02-9074-924CB573CD6E.png
by 283
Tue Jan 15, 2019 3:45 pm
Forum: Hankinson designs
Topic: Motor stringers
Replies: 6
Views: 1364

Re: Motor stringers

Laminated is often stronger and straighter than solid lumber.
by 283
Thu Jan 03, 2019 7:35 am
Forum: Power Boats
Topic: Window Frame Design
Replies: 6
Views: 1516

Re: Window Frame Design

Here’s some pics that I saw on CL from a boat for sale. Thought it looked like a nice design...
9DDAADEA-B1BD-4A5F-B866-4348B4828AE1.jpeg
B0626221-DDA7-4E7C-B503-C80C71ADFE6E.jpeg
CA825F65-946D-4672-B2BC-29E80C3C47CE.jpeg
by 283
Sun Dec 30, 2018 5:02 pm
Forum: Power Boats
Topic: Building The Vera Cruise
Replies: 2604
Views: 461775

Re: Building The Vera Cruise

When I make templates like that (for countertops) I use a hot glue gun. Quick and strong.
by 283
Sat Dec 22, 2018 4:28 am
Forum: Hankinson designs
Topic: attaching ply subdeck
Replies: 20
Views: 2817

Re: attaching ply subdeck

I also skipped the nails and screws on my build. I did use some temporary screws to hold things in place when clamps or weights wouldn’t work. My hull, frames and top deck have no fasteners in them. Though I did use the carriage bolts called for on the keel and transom. But I was building the little...
by 283
Fri Dec 21, 2018 4:00 pm
Forum: Hankinson designs
Topic: attaching ply subdeck
Replies: 20
Views: 2817

Re: attaching ply subdeck

If using epoxy as an adhesive does one really need to screw off the sub deck (or hull) every three inches? Or are they needed for structural reasons. And if so wouldn’t there be a difference between the schedule for nails vs screws?
by 283
Sat Dec 15, 2018 8:07 am
Forum: Power Boats
Topic: Building The Vera Cruise
Replies: 2604
Views: 461775

Re: Building The Vera Cruise

jenko wrote:
Sat Dec 15, 2018 1:46 am
stop whining about fuel cost I have a 100 litre tank @ $1.80 au per litre :roll:
I see your 1.80/liter and raise you a twin engine two stroke jet boat ;)

FWIW every gallon of gas I buy for the boat and small engines gets the marine version of Stabil and Yamaha ring free.
by 283
Mon Dec 03, 2018 5:50 pm
Forum: Power Boats
Topic: Bravado build...fastening upright stringers at transom ( h
Replies: 6
Views: 2162

Re: Bravado build...fastening upright stringers at transom ( h

Can you post a pic of the areas your talking about?
by 283
Fri Nov 30, 2018 4:51 am
Forum: Small outboards
Topic: Fisherman
Replies: 94
Views: 10509

Re: Fisherman

IDK, but can stretching the length from the stem back change the angle of the keel/stem/frame intersection enough to change the measurements? Anyways what’s an inch here or there :P ? Line things up straight and plumb and go with it :wink: Welcome. Looking forward to watching what you do with the de...
by 283
Mon Nov 12, 2018 5:44 am
Forum: Design Modifications
Topic: Audeen Jetpump Help
Replies: 3
Views: 1454

Re: Audeen Jetpump Help

Have you tried changing the intake grate?

I don’t know much about them but I know there are many different designs available for less then a couple hundred bucks... might be worth researching to see if one would help your situation.

https://www.berkeleyjet.com/c-648-loader-scoops.aspx
by 283
Tue Nov 06, 2018 5:01 am
Forum: Design Modifications
Topic: Build methods
Replies: 9
Views: 2085

Re: Build methods

And an OC24 that hightechmarine made out of foam core.
B71F6E14-4078-4595-B858-7E53968A4999.jpeg
by 283
Tue Nov 06, 2018 4:59 am
Forum: Design Modifications
Topic: Build methods
Replies: 9
Views: 2085

Re: Build methods

@christer Another forum to check out https://messing-about.com/forums/ It’s the discussion board for several designers including B&B and bluejacket. Bluejackets are stitch and glue while most of the B&B are plank on frame or cold molded. Unlike glen l plans they are using a lot of plywood for the fr...