Search found 371 matches

by Butch Barto
Sat Oct 20, 2007 7:00 pm
Forum: Power Boats
Topic: power questions
Replies: 21
Views: 6405

I SHOULD PUT TWO OF THEM V10 IN MY NEXT PROJECT IF I CAN GET A DOATION FROM EVERY BODY ON THIS FORUM
by Butch Barto
Sat Oct 20, 2007 5:13 am
Forum: Power Boats
Topic: power questions
Replies: 21
Views: 6405

I LOOKED AT MY SPEC SHEET I MADE A BO BO 500LB-FT IS PEAK TORQUE NOT 400
by Butch Barto
Sat Oct 20, 2007 5:01 am
Forum: Power Boats
Topic: power questions
Replies: 21
Views: 6405

I BUILT THE HANKINSON TAHOE 23 STRECHED TO 24' 4'' I HAD TO CLEARANCE THE BOTTOM FRAMES UNDER THE MOTOR AND REINFORCED THE KEEL WITH 3X4 L-ANGLE BOLTED TO THE MOTOR SUPPORTS ALSO HAD TO CLEARANCE THE HATCH COVERS (YES 8.1)THERE IS NOTHING LIKE A BIG BLOCK 500 LB-FT @3200 RPM
by Butch Barto
Fri Oct 19, 2007 7:32 pm
Forum: Hankinson designs
Topic: Belle Isle 23- front cockpit
Replies: 18
Views: 8638

Dick CHECK OUT MY TAHO 23 INNOCENCE SOME WHERE ON THIS SITE I THINK ON THE HANKISON AREA OR FORUM I SPLIT THE FRONT COCPIT ADDED A SWIM PLATFORM
by Butch Barto
Fri Oct 19, 2007 5:24 am
Forum: Power Boats
Topic: Steering - Stop me before I...
Replies: 43
Views: 12029

GO TO LACARRA STEERING WHEELS WEB SITE YOU CAN FIND SOME VINTAGE WHEELS THERE I HAVE THE MARK 10 WITH THE HORH RING MOUNTED TO SEASTAR HELM THE WHEEL COMES IN PRIMER THE TRIM POLISHED ALUMNIUM I PAINTED MINE CREAMY WHITE AND SENT THE METAL PARTS FOR CHROME
by Butch Barto
Fri Oct 19, 2007 5:06 am
Forum: Power Boats
Topic: power questions
Replies: 21
Views: 6405

i am runing a hurth zf 1.2-1 it has some down angle builtin it came packaged together with Marinepower 8.1 385 hp, 400 ft# of torque
by Butch Barto
Thu Oct 18, 2007 3:57 pm
Forum: Boat Power
Topic: aluminum for motor mount source
Replies: 17
Views: 6214

BILLY C I USED 3X4X3/8 ON MY HANKINSON TAHO 23 I BOLTED THE MOTOM MOUNTS TOGATHER BY RIPING DOWN SOME SHORT PEICES OF THE ANGLE FOR L-BRACKETS IN THE CORNERS AND THREE 1/2''BOLTS SIX ON EACH CORNER.I MADE THE MOTOR SUPPORTS AS LONG AS THE ENGINE COMPARMENT BOLTED TO THE STRINGERS EVERY 6''.I HAVE A ...
by Butch Barto
Wed Oct 17, 2007 4:58 pm
Forum: Gathering 2007
Topic: The Gathering
Replies: 45
Views: 31892

I TOOK MINE TO A SMALL RIVER NEAR BY AND PUT HER IN THE WATER LONG BEFORE SHE WAS FINISHED TO MARK FOR BOOTTOP STRIPE I DID HAVE MY MOTOR IN AND HOOKED UP ,HAD TO ADD SOME LIFTING WEIGHTS FOR THINGS THAT WERE MISSING. ALSO A LEAK CHEAK .I COULD NOT RESIST I HAD TO CRANK HER UP ,MAN DID SHE SOUND GOO...
by Butch Barto
Wed Oct 17, 2007 5:15 am
Forum: Power Boats
Topic: hacker flapper 18'
Replies: 27
Views: 11773

THAT IS A NICE LOOKING BOAT I LIKE IT.WHY NOT BUILD THE 25 FOOTER YOU WILL HAVE A LOT BETTER RIDE IN CHOPPY WATER. AND MOORE ROOM FOR FREELOADONG FRIENDS THAT NEVER CHIPIN FOR GAS AND ALWAYS THE FIRST TO BOLT WHEN IT'S TIME TO CLEAN THE BOAT.[FOUR BANGERS] BAAH, I SHOHORNED A 8.1 BIG BLOCK IN MY TAH...
by Butch Barto
Wed Sep 12, 2007 3:17 pm
Forum: Gathering 2007
Topic: Who's Going To Be There Friday Night?
Replies: 18
Views: 15656

FRIDAY NIGHT

BILL , MY WIFE AND I WILL BE AT THE GATHERING SOME TIME FRIDAY WITH FRIENDS WE WILL HAVE (INNOCENCES) IN THE WATER .LOOKING FOWARD TO SEEING YOUR TAHOE 19 AND ALL THE OTHER BOATS AND BUILDERS
by Butch Barto
Mon Sep 10, 2007 6:18 pm
Forum: Gathering 2007
Topic: Schedule ?
Replies: 18
Views: 15713

HAY YALL I AINT GOOD WITH THIS COMPUTER STUFF .BUT MY WIFE PAULA AND I WILL BE THER WITH OUR BEST FRIENDS FROM THE TAMPA AREA AND OUR BOAT INNOCENCE. WE HAVE A CABIN AT THE PARK. SHRIMP , BEER AND HOMEMADE BOATS! SOUNDS LIKE A MY KINDA SHINDIG ! WE WILL BE THERE FRIDAY MORNING. I AM LOOKING FORWARD ...

Go to advanced search