Search found 195 matches

by RobertCugini
Tue Mar 24, 2020 6:43 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

The glue seam ends up on the side and is covered by the rub rail.
by RobertCugini
Tue Mar 24, 2020 6:21 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

I carried the 1/4 inch plywood to the edge, then the solid covering board of aprox 5/8 on top of the 1/4. I made a edge strip that covered the edge of the plywood and which the covering board then covered. It worked out well.
by RobertCugini
Sun Mar 08, 2020 11:30 am
Forum: Hankinson designs
Topic: Annapolis barrelback 19
Replies: 11
Views: 5875

Re: Annapolis barrelback 19

Certainly wood veneer supplied my veneer in 1/6 thickness which was helpful. More leeway than 1/8th of an inch.

https://www.certainlywood.com/locator.php

Robert
by RobertCugini
Wed Jan 29, 2020 7:32 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

Been making progress. Ventalators are installed. Trim rail is on, blower has been installed, rudder and steering are installed, water pickup is almost ready for install, fuel tank is in process. Getting closer....
IMG_1441.jpg
by RobertCugini
Tue Nov 26, 2019 5:15 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

I have a question for the list. Can anyone send me some picture or tell me how they fastened the lifting eyes on a barrelback?

Thanks

Robert
by RobertCugini
Tue Nov 26, 2019 5:13 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

IMG_1366.jpg
IMG_1365.jpg
IMG_1368.jpg
by RobertCugini
Wed Aug 28, 2019 5:21 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

Seats are progressing
Ready to veneer

RC
by RobertCugini
Sun Jul 21, 2019 9:27 am
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

Oh, also bought a $29 dollar drill from Harbor Freight that was a right angle drill, (With plug, no battery!) that worked really well on the tight quarters....

FYI

RC
by RobertCugini
Sun Jul 21, 2019 9:24 am
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

Finished installing the floor and the two bulkheads yesterday. Ready for the cockpit sides and construction of the seating. I've made and finished the seat frames, now just fitting them. I'll post some more pictures shortly.
by RobertCugini
Fri Jun 07, 2019 3:09 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

Seats are coming along nicely, I will post a picture shortly.
What I could really use is some pictures of how people have run their
wiring. Did you notch the frames to accommodate or did you drill each frame?
I'm curious as to how everyone does it....

RC
by RobertCugini
Fri Apr 12, 2019 7:36 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

Making mahogany plywood for the interior. Vacuum bags the veneer onto 1/8 marine plywood.
Turned out great!
by RobertCugini
Tue Mar 12, 2019 8:52 am
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

Bill is right, a lot can be done before the top deck. Some people do all the mechanical before the deck. I chose to finish the boat first, but did do some of the future work, I drilled the shaft hole, mounted the strut, located and drilled the rudder hole. I did prime the bottom of the deck plywood ...
by RobertCugini
Mon Mar 11, 2019 11:43 am
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

I sanded the epoxy primer with a foam block and then wiped it down with actone. I did not sand the between the two coats of bildge paint, but I did apply them withing 24 hours.

RC
by RobertCugini
Sun Mar 10, 2019 8:08 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

IMG_0958.jpg
by RobertCugini
Sun Mar 10, 2019 8:00 pm
Forum: Hankinson designs
Topic: Seattle Barrelback progress
Replies: 326
Views: 178338

Re: Seattle Barrelback progress

Painting the interior, I'm using Sandusky's Chris Craft bilge paint, Its a lot of brush work... I'm doing two coats a section or two at a time. I've also finished cutting out the floorboards and am finishing them with 3 coats of CPES, two coats of epoxy primer and two coats of bilge paint. Lots of u...

Go to advanced search