Canoes, Kayaks, Pedal power

Moderator: BruceDow

Posts: 19
Joined: Tue Jan 11, 2011 10:43 am


Postby tclark » Fri Aug 21, 2015 12:28 pm

Finished my SUP and it looks great but does not track well. The plans I purchased did not provide for a fin. The plans were not from Glen L.

Any ideas on adding a fin after the fact ? Would a brass canoe Keel mounted to the bottom and running the length of the board make it track better?

There are SUP fin inserts available on the internet but I would have to router out a slot and insert and of course the middle of the boat has the keel running lengthwise, so routering that might complicate matters.

User avatar
Posts: 254
Joined: Sun Oct 13, 2013 8:20 pm
Location: Lake Point, UT

Re: SUP Fin

Postby Ronb172 » Mon Mar 28, 2016 3:59 pm

I see no one answered you on this. Did you figure something out? I would go with routing out a hole and add balsa blocks to hold the fin box. You could then re plank over the exposed balsa.
Squirt almost ready to get wet
Building my third SUP.
Started the Topper build.

Return to “Human Power”

Who is online

Users browsing this forum: No registered users and 3 guests