Glen-L.com • View topic - And the SUP is FINISHED

View unanswered posts | View active topics

Board index » Odds and Ends » Miscellaneous

All times are UTC - 8 hours [ DST ]

And the SUP is FINISHED

Moderators: upspirate, Bill Edmundson

Page 4 of 6

[ 82 posts ]

Go to page Previous 1, 2, 3, 4, 5, 6 Next

Print view

Previous topic | Next topic

Author

Message

DaveLott

Post subject: Re: And the SUP has begun

Posted: Sun Jun 03, 2012 5:44 pm

Joined: Sat Jul 04, 2009 3:50 pm
Posts: 3653
Location: Branson, MO

I was able to get the fins on this evening. Coming along fine now.

Jeff - Yes, I did get the 3mm ply from World Panel. When I ordered the fins and breather tube I decided to go ahead a buy a set of frames. I will build another one of these again. After buying these fins, I could have easily made them myself. I will make the next set.

It is just now a matter of getting the finishes on and will be ready to take her out.

Attachment:

Fins.jpg [ 1.65 MiB | Viewed 545 times ]

_________________
Dave

My Riviera build - the Midnight Cry Project

Video of Midnight in Action
Blog

Few things in the world measure up to the thrill and satisfaction of boating in a boat that you built.

Top

vupilot

Post subject: Re: And the SUP has begun

Posted: Sun Jun 03, 2012 6:26 pm

Joined: Wed Apr 15, 2009 7:36 am
Posts: 2081
Location: Indy

Like the song says.... You got, Fins to the left, fins to the right!

http://www.youtube.com/watch?v=-zvASjIvwnw

Hope all is on the up Dave.

_________________
My Zip build log...
http://www.vupilot.blogspot.com
http://picasaweb.google.com/vupilot/Chr ... O0x7SvsQE#

"Nothing screams poor craftsmanship like wrinkles in your duct tape."

Top

DaveLott

Post subject: Re: And the SUP has begun

Posted: Sun Jun 03, 2012 7:09 pm

Joined: Sat Jul 04, 2009 3:50 pm
Posts: 3653
Location: Branson, MO

Hilarious!!!!

things are stable. thank you. Now time to rebuild

Top

DaveLott

Post subject: Re: And the SUP has begun

Posted: Mon Jun 04, 2012 7:18 pm

Joined: Sat Jul 04, 2009 3:50 pm
Posts: 3653
Location: Branson, MO

And more progress. Deck Striping done

Now to seal the pin striping in and start the varnish work before painting the bottom black. Getting closer closer closer

Attachment:

Deck Striping.jpg [ 1.74 MiB | Viewed 512 times ]

Top

Roberta Hegy

Post subject: Re: And the SUP has begun

Posted: Tue Jun 05, 2012 4:40 am

Joined: Tue Jul 31, 2007 5:23 pm
Posts: 2873
Location: East Troy, Wisconsin

WOW!!! That is looking really nice!!!!

Roberta

_________________
Roberta
Built Zip "Oliver IV" and Super Spartan "Jimmy 70"

Top

vettepilot

Post subject: Re: And the SUP has begun

Posted: Wed Jun 06, 2012 3:26 pm

Joined: Wed Jan 26, 2011 12:40 am
Posts: 234
Location: Childers SE Queensland

Love It

I want one....

_________________
The Bitterness of Poor Quality, Remains Long After The Sweetness of Cut Price is Forgotten...Thanks Dad R.I.P.

Top

DaveLott

Post subject: Re: And the SUP has begun

Posted: Wed Jun 06, 2012 6:08 pm

Joined: Sat Jul 04, 2009 3:50 pm
Posts: 3653
Location: Branson, MO

The deck striping is now encapsulated with 2 thick coats of epoxy. I will wait until this weekend to fair it smooth and start the varnish treatment. The bottom is ready for paint.

I might make it on the water by July 4th. 10 minutes of work and wait a day. 10 minutes of work and wait a day. on and on and on. I am losing my hair. :shock:

Top

kens

Post subject: Re: And the SUP has begun

Posted: Thu Jun 07, 2012 9:55 am

Joined: Wed Nov 12, 2003 5:25 pm
Posts: 3422
Location: Coastal Georgia

graphite powder mix makes black epoxy. no bottom paint required, and it is compatable with epoxy repairs in the future

_________________
God Bless our Troops; especially our Snipers

Top

DaveLott

Post subject: Re: And the SUP has begun

Posted: Thu Jun 07, 2012 4:23 pm

Joined: Sat Jul 04, 2009 3:50 pm
Posts: 3653
Location: Branson, MO

kens wrote:

graphite powder mix makes black epoxy. no bottom paint required, and it is compatable with epoxy repairs in the future

DUHHHHHHH!. I have a whole can of black dye. DUHHHHH!!! :lol:

Top

DaveLott

Post subject: Re: And the SUP has begun

Posted: Sat Jun 09, 2012 3:18 pm

Joined: Sat Jul 04, 2009 3:50 pm
Posts: 3653
Location: Branson, MO

Getting closer. Expecting to launch Father's Day - 3 years to the day Midnight Cry was started.

Attachments:

Bottom Paint.jpg [ 1.75 MiB | Viewed 401 times ]

Top

leakcheck

Post subject: Re: And the SUP has begun

Posted: Sat Jun 09, 2012 9:13 pm

Joined: Mon Nov 17, 2003 3:01 pm
Posts: 2947
Location: Lander Wyoming

I think I would have to build them in pairs so I could stand up on em! '
STeve

Top

DaveLott

Post subject: Re: And the SUP has begun

Posted: Sun Jun 10, 2012 10:27 am

Joined: Sat Jul 04, 2009 3:50 pm
Posts: 3653
Location: Branson, MO

I have another set of frames but you have to come to my shop. :lol:

Top

DaveLott

Post subject: Re: And the SUP has begun

Posted: Fri Jun 29, 2012 3:45 pm

Joined: Sat Jul 04, 2009 3:50 pm
Posts: 3653
Location: Branson, MO

So, in the last 6 weeks, I lose my job, lose half my net worth and lose my mother. What do you do when you get knocked off a horse? You get back on and start riding again.

First coat of varnish went on like a charm. Perhaps I should have cleaned my workbench before I started but I am not as clean a worker as some of ya'll. I have a friend who does professional restorations and it is not uncommon for him to varnish standing in an inch of sawdust. He claims it is not what is in the air or on the floor that is the problem but more importantly what is on the surface and in your brush. That is what he is a stickler about. I am finding out if that is true :roll:

Or it could be that I am being lazy :shock:

Attachment:

First Varnish.jpg [ 1.43 MiB | Viewed 280 times ]

Top

Roberta Hegy

Post subject: Re: And the SUP has begun

Posted: Fri Jun 29, 2012 4:32 pm

Joined: Tue Jul 31, 2007 5:23 pm
Posts: 2873
Location: East Troy, Wisconsin

Look's Great, Dave!!! All the Best to you in getting things back in order. Sorry to hear about your mother.

Roberta

_________________
Roberta
Built Zip "Oliver IV" and Super Spartan "Jimmy 70"

Top

vupilot

Post subject: Re: And the SUP has begun

Posted: Fri Jun 29, 2012 5:20 pm

Joined: Wed Apr 15, 2009 7:36 am
Posts: 2081
Location: Indy

What is it they say? All the bad stuff comes in three's? Things should be swinging back up for you Dave. Glad you can still spend some therapy time finishing up the SUP.

_________________
My Zip build log...
http://www.vupilot.blogspot.com
http://picasaweb.google.com/vupilot/Chr ... O0x7SvsQE#

"Nothing screams poor craftsmanship like wrinkles in your duct tape."

Top

Page 4 of 6

[ 82 posts ]

Go to page Previous 1, 2, 3, 4, 5, 6 Next

Board index » Odds and Ends » Miscellaneous

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: hdunk and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: