Page 1 of 1

Glen-L Logo Vector file to use on Boat Decals, Etc.

Posted: Mon Jul 29, 2013 3:05 pm
by Gayle Brantuk
CNC Bill was kind enough to take the Glen-L logo and turn it into a vector file which is much better quality and can be used to print on vinyl or whatever else you may want. Here's the link:
http://www.glen-l.com/images/glen-l-vector-logo.svg

Thank you so much for doing this Bill!

Re: Glen-L Logo Vector file to use on Boat Decals, Etc.

Posted: Tue Jul 30, 2013 12:51 pm
by Bill CNC
Were still having an issue getting it to be a downloadable file on the forum. Until it's sorted out, ... you can send me a PM with your email-addy and I can send it directly to you.

Regards
Bill

Re: Glen-L Logo Vector file to use on Boat Decals, Etc.

Posted: Wed Mar 30, 2016 8:57 am
by hoodman
I created a new vector file of the Glen-L logo. This is completely from scratch using the above logo as a guide. I could not seem to get what I needed with that file. There were no paths or anything in the above svg file. Maybe I was doing something wrong. Nevertheless, I decided to create this. I have posted a hi-res JPG preview because the forum wont let me post the AI, EPS, or SVG files that I have generated. Gayle, if you want them I will be happy to send them on so that you can post them to your site. I would host them but its not my logo, I don't own the trademark. In the meantime this JPG file is big enough to print at 29x18 inches at 300 dpi.
glen-l-hi-res-logo.jpg

Re: Glen-L Logo Vector file to use on Boat Decals, Etc.

Posted: Wed Mar 30, 2016 11:00 am
by Roberta
Thanks Matt. That will be very useful. I have had vinyl graphics made and some engraving done using the Glen L logo. This will make things easier with better resolution.

Re: Glen-L Logo Vector file to use on Boat Decals, Etc.

Posted: Wed Mar 30, 2016 3:53 pm
by Gayle Brantuk
Thanks Matt! Yes, email it to me and I can upload it to our site and provide a link. However, I'm not familiar with vector files which may be the reason that the one on our site doesn't work properly. So, if you have any tips, that would be great!