Farewell to my father...

Topics not covered by another category.

Moderator: Bill Edmundson

User avatar
gap998
Posts: 380
Joined: Wed May 20, 2015 5:40 pm
Location: Wales, UK

Re: Farewell to my father...

Post by gap998 » Sat Jun 17, 2017 3:11 pm

"Byddai y gallai pawb yn gadael etifeddiaeth o'r fath!" (Would that everyone could leave such a legacy)

Love & sympathy to all your family from Wales.
Gary

Planning a whole fleet, but starting with a Zip...I think.

"Just when you think you've made something idiot-proof, someone builds a better idiot!"

Soloboat
Posts: 397
Joined: Mon Mar 05, 2007 10:51 pm
Location: Orange CA

Re: Farewell to my father...

Post by Soloboat » Sat Jun 17, 2017 7:33 pm

Glen made it possible for me to realize a childhood dream. by the time I was ready to build a boat most plans had just lofting details and I thought I would have to find classes for me to understand this stuff. I happened upon this site and the simplicity of not having to loft made this dream a possibility. The Gaelic trans says it all. We all here celebrate his life's contribution to the amateur builder.
) Champagne dreams and wishes are possible on a beer budget. Just build the boat.
Nice curves are easy on the eyes.
Go sell crazy somewhere else we're all stocked up here."As Good As It Gets" Jack Nicholson.

BillW
Posts: 148
Joined: Sun Oct 05, 2008 8:03 am
Location: Seattle, WA

Re: Farewell to my father...

Post by BillW » Sat Jun 17, 2017 9:50 pm

To Gayle and all the Glen-L family,

We were so very sorry to hear of your loss. And yet we know that you have much for which to be thankful,
in that Mr. Witt had a very long life, and a very remarkable career.

Mr. Witt was truly a legend in his own time; a very long time. I have been a fan of Glen-L boats for more than
half a century.

All the best to you,
Bill and Linda Whitney

red
Posts: 612
Joined: Wed Dec 16, 2009 3:54 pm
Location: Milner Ga.

Re: Farewell to my father...

Post by red » Sun Jun 18, 2017 10:09 am

sorry for your loss and also a sad day for the boating world he will truly be missed

WayWard
Posts: 18
Joined: Sat Jun 10, 2017 2:53 pm
Location: Maryland

Re: Farewell to my father...

Post by WayWard » Sun Jun 18, 2017 11:55 am

I know I'm very very new to this community. But I am terribly sorry to hear this.

My most sincere condolences.

User avatar
Ibrew2be
Posts: 131
Joined: Sat Aug 03, 2013 4:52 pm
Location: Cincinnati, OH

Re: Farewell to my father...

Post by Ibrew2be » Mon Jun 19, 2017 7:59 am

Gayle and family:

Your father has left a marvelous legacy. I have felt for some time that anything any of us has achieved in boat building has been accomplished standing on the shoulders of a giant, Glen Witt.

Wishing you peace and comfort at this difficult time.

Barry
Barry Shantz

Imp built and launched. Thinking hard about Boat 2.0

garrech
Posts: 150
Joined: Tue Oct 11, 2005 8:22 pm
Location: South Carolina

Re: Farewell to my father...

Post by garrech » Mon Jun 19, 2017 8:28 am

Gayle,
I'm so sorry for your loss, and so thankful for all your dad has done for us. Thank you for continuing his legacy.
Chris

hoodman
Posts: 2255
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Farewell to my father...

Post by hoodman » Mon Jun 19, 2017 4:20 pm

Hi, Gayle, I just found out about your dad. I am so sorry to hear about his passing. I'm sure that father's day was a difficult day this year. It was my pleasure to speak with you at length at G10 and learn a little about your dad. I'll remember you and your family in my prayers!
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139

PeterG
Posts: 703
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: Farewell to my father...

Post by PeterG » Mon Jun 19, 2017 6:26 pm

Hi Gayle and Family, so sorry for your loss. Your dad has a wonderful legacy and has positively affected many, many lives. We are all celebrating his life and works whenever we build or run one of his creations.
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

User avatar
Gayle Brantuk
Posts: 1765
Joined: Tue Nov 11, 2003 1:02 pm
Location: San Clemente, CA
Contact:

Re: Farewell to my father...

Post by Gayle Brantuk » Tue Jun 20, 2017 10:32 am

I'm finally getting around to reading the tremendous number of replies, emails, posts, etc. that everyone has made. Thank you all so much--I can't tell you how much it means to all of us. You all are and continue to be a blessing to me...

User avatar
jenko
Posts: 914
Joined: Sat Mar 19, 2011 2:50 am
Location: Pine Mountain . Vic . Australia
Contact:

Re: Farewell to my father...

Post by jenko » Tue Jun 20, 2017 4:20 pm

Very sad news .My condolences to all your family , what an inspiration he was for many :(

DSR
Posts: 274
Joined: Mon Mar 21, 2016 8:11 pm
Location: Allegan, Michigan

Re: Farewell to my father...

Post by DSR » Tue Jun 20, 2017 4:35 pm

I'm sorry to hear of your father's passing. He's been a big inspiration to me for a long time.
My prayers for you and your family.

Dave
DSR Performance - Home of yet another jet TNT build :D
Codename "Just A Little....."
viewtopic.php?f=23&t=29753

TAB
Posts: 110
Joined: Tue Aug 09, 2016 3:22 pm
Location: OR

Re: Farewell to my father...

Post by TAB » Fri Jun 23, 2017 12:01 pm

He helped a lot of people get on the water

Kevin Morin
Posts: 742
Joined: Thu Jan 24, 2008 11:36 am
Location: Kenai, Alaska

Re: Farewell to my father...

Post by Kevin Morin » Fri Nov 29, 2019 12:56 am

My Thanksgiving in 2019 includes my thanks for a man I never had the pleasure of meeting. I was a bit young to communicate beyond ordering plans but for someone my age they were a tad expensive. Growing up in rural Alaska in the 60's Glen's ad's were in some editions of Boy's Life and a couple of other magazines I'd see second hand here and there. They just thrilled me with the idea of being able to build my own boat!

One summer here in Kenai, Alaska my folks finally got to afford to build our own home but while it was being built we moved to another family's home on a lake that they weren't using. i could not ever have imaged the treasures Id find and turning point in my life would come from that very kind sharing of an unused home by one family to another.

The family owned a homestead on a large fresh water lake, but lived a few miles away on the salt water (Cook Inlet) so the entire house, barn and lake were empty and our family moved in. There was a barn on the property and inside the barn was the treasure of a young man's (12 year old boy) dreams.

The grandfather of the boys my age, in the family who'd offered their lake side home for the season, was a retired US Marshal of the area of AK and in his retirement he turned to making boats from Glen L Witt's plans! He built more than a few! They were stored in a barn.

Inside the barn, were half dozen small wooden boats, a punt, a duck boat, a couple little sailors and some small power boats. And the magic of the experience was finding, rolled up in old cardboard tubes; the plans. Some of the early skiffs Mr. Peterson had acquired lofted patterns to lay-down his frames; later he'd just used lines and lofted his skiffs and the full size Profile and superimposed Body was still visible in tiny nails he's used to loft the lines. IN one corner of a post of the barn (a spruce log), tied to nails with string, were a series of very nice spruce battens he'd built to lay down his lines on the larger sheets of painted ply.

At first I thought the shapes were familiar but couldn't make a clear association- but after an hour or two with magazines and the rolled plans I realize Allen Peterson had built half dozen of Glen's designs! I was in heaven.

I talked the adults into letting me re-calk (12-13yr old's don't have that much skill!) and got my father to help put in some replacement screws along chines and sheer clamps, and had two of the fleet ready to sail in a week or so.

In the meantime I spent every day, all day, glued to the work bench trying to figure out the details of making a lines plan turn into a boat! I was given some balsa wood by a teenage friend of family and started to copy the boats at model scale. Then one afternoon while rowing the 'duck boat' design out on the lake it came to me the idea of scale!

From that time on, I've been totally intrigued with boats, marine forms and the lines and construction of boats.

This Thanksgiving I'm thankful for Glen L Witt's unknowing but generous gift to a boy those many years ago of elegant lines, well found skiffs and clean solutions to the many marine design challenges. I'm thankful for his honesty in design, for his lovely art that I still draw on when I create a new shape, and for his willingness to offer his 'stock' plans for very low costs to enable a grandfather to build skiffs for his grandsons; in remote Alaska.

Glen's lines and plans were the main influence in me going on to draw and build hundreds of boats from 2' to 40' which I've built of welded aluminum. Can hardly think of anyone I'll enjoy meeting, more, in the Sweet Hereafter, than Glen L. I still have some questions he'd likely answer - and if not? I know I'll enjoy the conversation.

Thanks Glen, for inspiring my life in boats.

Kevin Morin
Kenai, AK
Kevin Morin

User avatar
Gayle Brantuk
Posts: 1765
Joined: Tue Nov 11, 2003 1:02 pm
Location: San Clemente, CA
Contact:

Re: Farewell to my father...

Post by Gayle Brantuk » Mon Dec 02, 2019 12:13 pm

Wow Kevin. Thank you so much for sharing your story and for all your kind comments about my father. This has made my week. Many blessings to you...

Post Reply

Return to “Miscellaneous”