Need help!!!!

What kind, options, etc.

Moderators: ttownshaw, billy c

User avatar
Aussie
Posts: 270
Joined: Wed Feb 10, 2010 4:31 pm
Location: Sarina Queensland Building 23ft Belle Isle

Need help!!!!

Postby Aussie » Thu Mar 08, 2012 3:26 am

Hi,

Need some help in finding a dealer that sells the Raptor stapler gun here in Australia...
I have been looking but finding it hard to find anywhere...

Any help would be great...

Jamie

neel thompson
Posts: 989
Joined: Fri Oct 01, 2010 2:33 pm
Location: Collegeville, Pa

Re: Need help!!!!

Postby neel thompson » Thu Mar 08, 2012 4:54 am

Jamie, I think you can buy it online directly through Raptor. I don't think they have dealers anywhere.

User avatar
jamundsen
Posts: 1494
Joined: Tue May 26, 2009 12:47 pm
Location: Lakeland, Fl
Contact:

Re: Need help!!!!

Postby jamundsen » Thu Mar 08, 2012 11:15 am

They prefer Paypal or check for payment
John Amundsen
Monte Carlo
Lakeland,Fl

Work tends to get in the way of boat building

User avatar
keith
Posts: 171
Joined: Tue Aug 04, 2009 8:43 pm
Location: Auckland, New Zealand

Re: Need help!!!!

Postby keith » Thu Mar 08, 2012 8:46 pm

Email Terry at info@brafordindustries.com.au

I have been in contact with him, but he didn't seem to want to give me prices.

I asked him about both the brads and the guns. He wanted to send me a gun to try and then bill my Visa. He did send me a box of 18g to try in a gun I already have. But every time I asked about pricing for both the guns and the brads I get no reply.

Good Luck
Building a Monaco....provisionally called "Serenity"
http://glen-l-monaco.blogspot.com/

Trackhappy
Posts: 1411
Joined: Wed Feb 17, 2010 5:42 pm
Location: Sunshine Coast, Queensland, Australia. Building Gentry.

Re: Need help!!!!

Postby Trackhappy » Thu Mar 08, 2012 11:00 pm

Tispac apparently stock them
https://tispac.com.au
By the time I have built a boat, I'll be ready to build a boat....

User avatar
keith
Posts: 171
Joined: Tue Aug 04, 2009 8:43 pm
Location: Auckland, New Zealand

Re: Need help!!!!

Postby keith » Fri Mar 09, 2012 2:24 am

Tispac and Bradford industries are the same organisation.
Building a Monaco....provisionally called "Serenity"
http://glen-l-monaco.blogspot.com/

User avatar
jenko
Posts: 812
Joined: Sat Mar 19, 2011 2:50 am
Location: Pine Mountain . Vic . Australia
Contact:

Re: Need help!!!!

Postby jenko » Fri Mar 09, 2012 4:04 am

I am using the 15 gauge brads in a 16 gauge cambell hausfield brad gun takes up to 2" brads had to smooth out brad track as it was a bit rough works fine
can buy new from Hare and Forbes Machinery warehouse I think around the 100 buck mark


Return to “Fasteners”

Who is online

Users browsing this forum: No registered users and 1 guest