Sandpaper

Painting options, interior and exterior.

Moderators: ttownshaw, billy c

largej
Posts: 72
Joined: Mon Dec 16, 2013 1:47 pm
Location: Sparks Nevada

Sandpaper

Postby largej » Tue Feb 16, 2016 8:00 am

I know there is probably no clear answer but interested in hearing from the group.
When is a piece of sand paper ready for the trash can?
I am always temped to use it to the very end but know it becomes less effective - I can feel it when I switch to a new piece.
This not a question of what type of sandpaper to use, but when to say it is "done."
Just asking...
thanks - Jim
my Utility is getting there.
Attachments
Framing Deck.JPG

red
Posts: 609
Joined: Wed Dec 16, 2009 3:54 pm
Location: Milner Ga.

Re: Sandpaper

Postby red » Wed Feb 17, 2016 8:47 am

think of sandpaper as a tool when it gets dull and stops cutting easily its time to change

User avatar
chugalug
Posts: 1195
Joined: Sat Nov 29, 2014 5:01 pm
Location: top of mn.

Re: Sandpaper

Postby chugalug » Wed Feb 17, 2016 10:06 am

:D Sometimes you can clean it using a big rubber eraser.sometimes Wd-40 ill also clean,but I don't know if epoxy will stick if any residue is left on boat.best if using eraser or just buy new.
Working on regular-sized Bo-Jest


"If it's not crooked,It's not mine

gdcarpenter
Posts: 1354
Joined: Tue May 05, 2009 12:18 pm
Location: Raleigh, North Carolina

Re: Sandpaper

Postby gdcarpenter » Wed Feb 17, 2016 3:59 pm

I am a 'Cheap' Canadian, but also, at my age, try to work smart instead of hard. When I reach the point of 'Diminishing returns' on effort vs results, it's time to suck it up and get a new sheet of sandpaper.

"the only good thing about beating your head against a brick wall is that it feels good when you stop" :)
This is my first, last and only boat build.

http://www.gdzipbuild.blogspot.com

User avatar
Bill Edmundson
Posts: 11078
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Sandpaper

Postby Bill Edmundson » Wed Feb 17, 2016 4:07 pm

It's time to change it about 10 minutes before I do it! :roll: :?

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

largej
Posts: 72
Joined: Mon Dec 16, 2013 1:47 pm
Location: Sparks Nevada

Re: Sandpaper

Postby largej » Thu Feb 18, 2016 11:03 am

Good stuff all - I think Bill nailed it. Too bad there was not some sort of indicator - color change as it wears down. But, I probably would still use it for another 10 minutes...

User avatar
tcough
Posts: 180
Joined: Sat Jul 19, 2014 1:30 pm
Location: Panama City, FL

Re: Sandpaper

Postby tcough » Thu Feb 18, 2016 11:36 am

For me, it all depends on how many, if any, sheets I have left. :D
Happy Boating,
Tracy

Building a 19'-9" Flats Flyer

User avatar
mrintense
Posts: 2886
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Sandpaper

Postby mrintense » Thu Feb 18, 2016 2:35 pm

I'm inclined to go with the replace it when it becomes a chore to use club. If that means buying a lot of sandpaper, then so be it. When I was smooth sanding my hull after fiberglassing, I bought a bulk pack of sanding disks. I was changing them about every 5 minutes. Made life a lot easier and only cost me a few tens in the end.
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise named "Some Other Time"

Clipper's Vera Cruise Build


Return to “Painting”

Who is online

Users browsing this forum: No registered users and 1 guest