Touching up stain

Painting options, interior and exterior.

Moderators: ttownshaw, billy c

Post Reply
User avatar
Jimbob
Posts: 578
Joined: Thu Jul 25, 2013 1:07 pm
Location: Sacramento, CA

Touching up stain

Post by Jimbob » Tue Sep 04, 2018 10:31 am

I have been touching up my boat because of small imperfections, and where I have sanded through the varnish and gotten in to the stain in a couple of spots.

I came up with a something that has worked well for me. I picked up a hvlp touchup gun at HFT for about $30 that works great. I thin down the stain and spray the area. The gun puts out a fine pattern similar to an air brush. I can follow up with the same gun spraying varnish over the new stain thinned 50%. The gun can be opened up to cover a wider area like a conventional gun.

Read about the stain markers on a ACBS email. The two colors shown are a good match for the Chris Craft mahogany and walnut stains. They work well also.

Thought someone might find this useful.

Jim



20180903_194853.jpg
20180903_194946.jpg
Jim Neeley
Building a Barrelback in Sacramento, CA
viewtopic.php?f=15&t=28089#p172969

User avatar
Gayle Brantuk
Posts: 1610
Joined: Tue Nov 11, 2003 1:02 pm
Location: San Clemente, CA
Contact:

Re: Touching up stain

Post by Gayle Brantuk » Thu Sep 20, 2018 11:43 am

Great idea, Jim. Thank you for sharing that...

Post Reply