Barrelback-20 Louisville Kentucky

A forum for contacting other builders of Ken Hankinson designs. These designs are now a part of the Glen-L family.

Moderators: Bill Edmundson, billy c

Hercdrvr
Posts: 1307
Joined: Mon May 11, 2015 12:52 pm
Location: McKinney TX

Re: Barrelback-20 Louisville Kentucky

Post by Hercdrvr »

Nice clean install, I like the aluminum angle mount brackets. I too had the same problem with my casters after the engine install, good call upgrading them for the added weight. I wrestled with mine until the boat went on the trailer.
Matt B

monitor
Posts: 137
Joined: Sat Feb 17, 2018 7:33 pm
Location: Louisville, Kentucky

Re: Barrelback-20 Louisville Kentucky

Post by monitor »

Thanks fellas. Fun stuff. Making exhaust tips now.
Jim Kinsella

User avatar
kens
Posts: 4950
Joined: Wed Nov 12, 2003 5:25 pm
Location: Coastal Georgia

Re: Barrelback-20 Louisville Kentucky

Post by kens »

I wish I could have stopped by to see that. I was at a cousin' place and felt stuffy sinus after. I didn't want to impose with the virus going on.
Come to find out, I should have stopped by.
And, there is another build up there also?
Oak is over rated, everything about it takes extra time; then it warps, splits or checks !!! :roll:

monitor
Posts: 137
Joined: Sat Feb 17, 2018 7:33 pm
Location: Louisville, Kentucky

Re: Barrelback-20 Louisville Kentucky

Post by monitor »

Another time Ken.
Yes, 10 minutes from me. 20' Barrel. He doesn't post, but does follow the forum. Beautiful boat!
Jim Kinsella

Post Reply

Return to “Hankinson designs”