Building modified Everglade in Australia

To allow builders of Glen-L RV's to communicate and discuss their projects

Moderator: Bill Edmundson

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Sat Feb 22, 2014 10:58 pm

Things seem to move along so fast when building the shell and then seem to slow down when you get into the details of the internal cabinetry.
Attachments
IMG_2718.JPG
IMG_2719.JPG
IMG_2720.JPG
For detailed up to date build information go to:
http://slidecamper.com

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Wed Feb 26, 2014 1:30 am

Actually made a few changes , didn't like the painted bits, so re-made new cabinet doors and fridge surround.
Attachments
cabinets.jpg
For detailed up to date build information go to:
http://slidecamper.com

jedema
Posts: 13
Joined: Tue Jun 18, 2013 6:26 am
Location: Hudsonville, Michigan

Re: Building modified Everglade in Australia

Post by jedema » Wed Feb 26, 2014 4:07 am

Growing up, my Dad would always tell me that the Devil was in the details. Looks like your doing a fantastic job with those details :)

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Thu Feb 27, 2014 2:10 am

jedema wrote:Growing up, my Dad would always tell me that the Devil was in the details. Looks like your doing a fantastic job with those details :)
Thank you jedema , :)
Attachments
IMG_2760.JPG
IMG_2766.JPG
For detailed up to date build information go to:
http://slidecamper.com

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Sun Mar 09, 2014 3:43 pm

Some more trim work, shelf on left for speakers radio & charging station for iGadget's. Some plumbing before kitchen bench goes in.
Attachments
IMG_2800.JPG
IMG_2792.JPG
IMG_2782.JPG
For detailed up to date build information go to:
http://slidecamper.com

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Wed Mar 12, 2014 11:58 pm

Kitchen bench after seal coat.
Attachments
IMG_2830.JPG
For detailed up to date build information go to:
http://slidecamper.com

Trackhappy
Posts: 1412
Joined: Wed Feb 17, 2010 5:42 pm
Location: Sunshine Coast, Queensland, Australia. Building Gentry.

Re: Building modified Everglade in Australia

Post by Trackhappy » Thu Mar 13, 2014 4:27 am

Looking great! Must be getting close now.
By the time I have built a boat, I'll be ready to build a boat....

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Fri Mar 14, 2014 12:02 am

Trackhappy wrote:Looking great! Must be getting close now.
Thank you, lots to do yet, , pantry & wardrobe doors , shower & toilet cladding/finish plumbing, start wiring 240v & 12v.
Windows, ceiling & vents outside cladding, door, grey water tank plus stuff I can't think of right now :shock:
List goes on, hope to be finished in 8 to 10 months or there about.
For detailed up to date build information go to:
http://slidecamper.com

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Sun Mar 16, 2014 4:32 am

Been busy lately.
Attachments
IMG_2887.JPG
IMG_2839.JPG
IMG_2863.JPG
For detailed up to date build information go to:
http://slidecamper.com

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Wed Mar 19, 2014 2:19 am

Worked on the fridge trim "again" today, I'm finally happy with it. (edit. 12/08/14 I have changed the cabinet door above the fridge , made it larger and also much lighter, it is removable if I should wish to install a microwave at some later date.An extra AC outlet will be installed below the fridge)
Attachments
IMG_2908.JPG
IMG_2909.JPG
Last edited by AusDevil on Mon Aug 11, 2014 4:52 pm, edited 1 time in total.
For detailed up to date build information go to:
http://slidecamper.com

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Sat Mar 22, 2014 4:23 am

spent some time with the cutlery draw. (edit 12/08/2014. I have decided to reserve this area for the switch panel and power board, the cutlery will be elsewhere.)
Attachments
IMG_2914.JPG
IMG_2916.JPG
Last edited by AusDevil on Mon Aug 11, 2014 4:54 pm, edited 1 time in total.
For detailed up to date build information go to:
http://slidecamper.com

BillS
Posts: 29
Joined: Thu Mar 13, 2014 3:51 pm
Location: College Park, MD

Re: Building modified Everglade in Australia

Post by BillS » Sat Mar 22, 2014 7:24 am

Looking Great! Your trim work is impressive!

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Sat Mar 22, 2014 11:12 pm

BillS wrote:Looking Great! Your trim work is impressive!

Thank you much appreciated :) , it's more time consuming than using plastic trim extrusions made for the job but I'm not time poor at the moment.
For detailed up to date build information go to:
http://slidecamper.com

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Tue Mar 25, 2014 5:36 am

In the last view days I have made a few changes and moved to slidecamper.com , had some issues some of you may have noticed the images all over the place and in the wrong order, this has now been corrected.
Now back to working on the camper I also wanted to say thank you for all the positive feedback from you guys. :D :D
For detailed up to date build information go to:
http://slidecamper.com

User avatar
AusDevil
Posts: 100
Joined: Sat Sep 21, 2013 8:58 pm
Location: Wilderness Tasmania
Contact:

Re: Building modified Everglade in Australia

Post by AusDevil » Mon Mar 31, 2014 2:56 am

Time for some music , ceiling next ....
Attachments
IMG_2949.JPG
IMG_2954.JPG
For detailed up to date build information go to:
http://slidecamper.com

Post Reply

Return to “Glen-L RV's”