Pee Wee in Maine

Outboard designs up to 14'

Moderator: ttownshaw

283
Posts: 115
Joined: Mon Oct 23, 2017 10:14 am
Location: Maine

Re: Pee Wee in Maine

Post by 283 » Sun Dec 03, 2017 7:06 am

Thanks JimmY. Hope to have it ready for Memorial Day.


:?: :?:

Would there be any benefit or downside to adding intermediate lifting strakes or maybe a reverse chine strake/spray rail? Or both... I’m a little concerned about getting on plane with 5hp with both of us on board.
Mike

283
Posts: 115
Joined: Mon Oct 23, 2017 10:14 am
Location: Maine

Re: Pee Wee in Maine

Post by 283 » Fri Dec 08, 2017 8:18 am

08BE7AA2-7535-4F7B-A132-C82B39E6F09E.jpeg
0F1BCDCA-4BB6-4803-9E41-1F9B691FC90C.jpeg
Mike

283
Posts: 115
Joined: Mon Oct 23, 2017 10:14 am
Location: Maine

Re: Pee Wee in Maine

Post by 283 » Mon Dec 11, 2017 4:31 pm

23803480-BFED-42B8-B005-AF96A7E62677.jpeg
6E39C405-5DAE-47B8-BC91-BF9D9071D7FB.jpeg
Mike

User avatar
Bill Edmundson
Posts: 11181
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Pee Wee in Maine

Post by Bill Edmundson » Mon Dec 11, 2017 4:42 pm

Mike

Looks good! At this point make sure the bottom is good and flat the last several feet. It's easy now. It will be a PITA later!

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
vupilot
Posts: 3389
Joined: Wed Apr 15, 2009 7:36 am
Location: Indy
Contact:

Re: Pee Wee in Maine

Post by vupilot » Mon Dec 11, 2017 5:28 pm

You are making quick work of it!

283
Posts: 115
Joined: Mon Oct 23, 2017 10:14 am
Location: Maine

Re: Pee Wee in Maine

Post by 283 » Mon Dec 11, 2017 7:49 pm

vupilot wrote:You are making quick work of it!
Hard part is waiting for the epoxy to dry. :wink:
Mike

283
Posts: 115
Joined: Mon Oct 23, 2017 10:14 am
Location: Maine

Re: Pee Wee in Maine

Post by 283 » Mon Dec 11, 2017 7:50 pm

Bill Edmundson wrote:Mike

Looks good! At this point make sure the bottom is good and flat the last several feet. It's easy now. It will be a PITA later!

Bill
Thanks for the heads up... just checked it. One side is perfectly flat. The other has a dip of 1/8” or less over the last two feet... how much is too much?
Mike

JimmY
Posts: 665
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Pee Wee in Maine

Post by JimmY » Tue Dec 12, 2017 10:33 am

[/quote]
Thanks for the heads up... just checked it. One side is perfectly flat. The other has a dip of 1/8” or less over the last two feet... how much is too much?[/quote]

an 1/8" :D :lol: :D
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

283
Posts: 115
Joined: Mon Oct 23, 2017 10:14 am
Location: Maine

Re: Pee Wee in Maine

Post by 283 » Tue Dec 12, 2017 12:26 pm

JimmY wrote:
Thanks for the heads up... just checked it. One side is perfectly flat. The other has a dip of 1/8” or less over the last two feet... how much is too much?[/quote]

an 1/8" :D :lol: :D[/quote]
That bad, huh? :oops:


...to be clear this is what we are talking about :?:
1DA0A583-1D20-4D91-9E9E-66DB90DC33BE.jpeg
039D18B8-BA8D-465E-AB95-B290553C1201.jpeg
293DFCF7-FDDB-4F2D-8C68-36EE0B3081AD.jpeg
Mike

User avatar
Bill Edmundson
Posts: 11181
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Pee Wee in Maine

Post by Bill Edmundson » Tue Dec 12, 2017 2:26 pm

Mike

As I said, easy to fix now. When you go to run it, and it starts porpoising it will be more work. You'll have to pull the engine, flip the boat, sand the paint off, fill the depression, fair, repaint, flip, remount the engine... Get the idea?

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
hoodman
Posts: 1907
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Pee Wee in Maine

Post by hoodman » Wed Dec 13, 2017 10:45 am

I had the same type of "hook" on my boat. I was able to fill it with a fairing compound I made with epoxy and a mixture of microballoons and wood flour. I put packing tape on my four foot level to screed if off level. Let it cure and then long board sanded. It takes a little bit of effort but as Bill says, now's the time.
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139

JimmY
Posts: 665
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Pee Wee in Maine

Post by JimmY » Wed Dec 13, 2017 5:22 pm

I second what the other guys have said. Much easier now. Later you are dealing with matching paint and polishing it.
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

283
Posts: 115
Joined: Mon Oct 23, 2017 10:14 am
Location: Maine

Re: Pee Wee in Maine

Post by 283 » Thu Dec 14, 2017 5:17 am

No worries, was planning to fill it after Bill mentioned it... was just looking for how flat pretty darn flat needs to be.
Mike

283
Posts: 115
Joined: Mon Oct 23, 2017 10:14 am
Location: Maine

Re: Pee Wee in Maine

Post by 283 » Thu Dec 14, 2017 9:04 am

7F1A56EC-CF58-409A-9E99-34CE4EA9577E.jpeg
Mike

User avatar
Bill Edmundson
Posts: 11181
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Pee Wee in Maine

Post by Bill Edmundson » Thu Dec 14, 2017 9:37 am

Mike

That looks easy enough. :D

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

Post Reply

Return to “Small outboards”