Glen-L.com

I told my son we can order the fiberglass kit as soon as all the pieces are cut out. We've got 3 of the 5 sheets of plywood all cut, I have a question about the Cabin Front "B". The blueprints say 1/4" PW x 8-1/2" x 42" and to cut length to fit. Does this mean it will be shorter than 42", or should I be cutting this piece longer?

Thanks in advance!

This piece ends up fitting to your work. So 42" is longer than needed. I waited until the cabin was framed before I cut my piece. I still cut it longer and wider than needed and trimed it after it was installed.

_________________
A secret to a good marriage is to have a quick mind and a slow mouth!!!

Thanks, Grand Chillin. I'll cut the piece bigger just in case.

One more question. I can't seem to find a few dimensions in any of the plans for the positioning of any of the bulkheads? I was about to cut out the forward seat tops and end caps last night and realized that I couldn't find the width anywhere. I figured this was maybe a builder preference but then realized I didn't have the location for any of the bulkheads.

** EDIT: Cancel that, the dimensions were staring me in the face on the patterns!