Squirt in Minnesota

Outboard designs up to 14'

Moderator: ttownshaw

Flash
Posts: 80
Joined: Mon Feb 03, 2014 10:56 pm
Location: Eagan, MN

Re: Squirt in Minnesota

Post by Flash »

Hi Steve,
Welcome back. It looks like your new house has a work shop. Your wife must be happy to have it out of the family room. I like the way you ran that steering cable up through the deck and the stripes look good too. I think I told you at Gull Lake that the Yellow Submarine was finished and that I started a Zip. The Zip is coming along pretty good. The second boat is much easier and faster. I just started to cut the plywood for the hull. It doesn't have a name yet so look for Frosty's Zip.

Steve F.

Flash
Yellow Submarine II - Flying Saucer
Summer Wind - Zip

Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Squirt in Minnesota

Post by Steve S »

Congratulations on the yellow submarine and happy building on the zip, Steve. Hope it turns out great. I'm sure it will. :D :D

Steve S
Squirt build

Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Squirt in Minnesota

Post by Steve S »

We ran the Squirt a couple if weeks ago and all went well. :D It's a fun boat to drive and it handles great. I am glad I added the skeg though. It still slides a little on the tight turns but it is a nice controlled slide. My wife is taking the video and I'm driving so there is about 300 pounds in the boat but it planed out fine. You can watch about 30 of the video at
https://youtu.be/hsfzQKpNeAY

Thanks all for the support...couldn't have done it without you. Anyone thinking of building a boat, do it!

Steve S
Attachments
20160516_122932.jpg
Squirt build

User avatar
vupilot
Posts: 3501
Joined: Wed Apr 15, 2009 7:36 am
Location: Indy
Contact:

Re: Squirt in Minnesota

Post by vupilot »

Fantastic! Thanks for the ride.

Fred Østli
Posts: 98
Joined: Thu Aug 09, 2012 12:03 am
Location: Northern Norway

Re: Squirt in Minnesota

Post by Fred Østli »

Time to comment on your result Steve. This boat looks perfect. Real good job. We used a 72 Mercury 200 (20hp) the first runs, but soething went wrong, and we now have a new Susuki. What is the pitch on your prop? Hope you take care not to get too much rpm. I believe that might be what happend to us,,, maybe. Our new motor has rpm limiter.

Anyway congratulations, and tell us right now what your next build is :mrgreen:

Fred

Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Squirt in Minnesota

Post by Steve S »

Thanks Fred but looks can be deceiving. :lol: I have a 9 pitch on my 20 HP Merc. It could use a slightly larger prop but I haven't looked for one yet. Did you blow up the first motor? How does the 15HP push your boat? Is it heavier then the 200?
Your welcome vupilot...thanks for all your help with my build.... :D
Squirt build

User avatar
Andy Garrett
Posts: 1352
Joined: Tue Aug 31, 2010 11:44 pm
Location: Nampa, Idaho

Re: Squirt in Minnesota

Post by Andy Garrett »

I opened that last picture here at work.

A coworker saw it and said, "That's a nice boat"!

I agree!
Andy Garrett

Perhaps the slowest Zip build in Glen-L history...

Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Squirt in Minnesota

Post by Steve S »

Thanks Andy. And thank your coworker. :)
Squirt build

User avatar
BayouBengal
Posts: 1093
Joined: Tue Jul 31, 2007 7:29 am
Location: Baton Rouge, Louisiana

Re: Squirt in Minnesota

Post by BayouBengal »

Beautiful Decking!

Fred Østli
Posts: 98
Joined: Thu Aug 09, 2012 12:03 am
Location: Northern Norway

Re: Squirt in Minnesota

Post by Fred Østli »

"looks can be deceiving". :lol: Yeah I know... no closeups from us! :mrgreen:

We did not blow up the Merc, bot it suddenly have som klikking noices and lost all torque. Our new Suzuki is just 4-5 kg heavyer than the Merc. Suzuki have the lightest of the 4-stokes, and this motor can be upgraded to 20. They measure hp different now, so an old Mercury 20HP would be measured 17 today. Our new motor has a rpm-limiter, so we have not achieved its full potential with the standard 9" pitch propeller. We now get 20 knots, with two adults, but expect 25 with a 12" pitch, and maybe closer too 30 with just one aboard.

If you have a 9" pitch, I recomend you to be carefull with full trottle. What is top speed so far?

Fred

Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Squirt in Minnesota

Post by Steve S »

Haven't checked the top speed yet. It seems fast though sitting down so far. I had a 5hp Suzuki years ago and it was a good motor. I'm interested in how your motor works with the larger prop. 30% larger is quite a bit. You might be passing every boat on the lake. 8)
Squirt build

User avatar
BarnacleMike
Posts: 1140
Joined: Wed Sep 21, 2011 7:47 am
Location: North Georgia / Chattanooga Area
Contact:

Re: Squirt in Minnesota

Post by BarnacleMike »

Beautiful job, Steve! Congratulations!!
"How long does it take to build a boat? Until it's finished" — yours truly
Why did the boatbuilder get a divorce? Because he didn't have enough clamps to hold his marriage together!

Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Squirt in Minnesota

Post by Steve S »

Thank you, Mike.
Squirt build

Flash
Posts: 80
Joined: Mon Feb 03, 2014 10:56 pm
Location: Eagan, MN

Re: Squirt in Minnesota

Post by Flash »

Hi Steve,

The Squirt looks great. Nice flat turns in the video.

I have seen Steve's Squirt in person and it is beautiful.

Congratulations on a great job, Steve!

Steve F
Yellow Submarine
Summer Wind ( formerly Frosty's Zip )
Flash
Yellow Submarine II - Flying Saucer
Summer Wind - Zip

Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Squirt in Minnesota

Post by Steve S »

Thank you Steve :D
Squirt build

Post Reply

Return to “Small outboards”