Flying Saucer Stability

Outboard designs up to 14'

Moderator: ttownshaw

Post Reply
User avatar
Bermuda
Posts: 11
Joined: Tue Mar 11, 2014 8:36 pm
Location: Bermuda

Flying Saucer Stability

Post by Bermuda »

I know the FS to be a bit unstable in rough water.
Has anyone tried putting a larger keel of Fin on one?

Are there any other ways to improve stability or should I just stick with the design and go with the flow?
Building a 12' Flying Saucer

User avatar
Bill Edmundson
Posts: 12000
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Flying Saucer Stability

Post by Bill Edmundson »

Bermuda

Most build per plans first. After you've run the boat a few times you can add a fin if you need it.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

John K
Posts: 1560
Joined: Thu May 18, 2006 5:19 am
Location: AL

Re: Flying Saucer Stability

Post by John K »

A 12 foot boat is always going to be unstable in rough water due to the short length and light weight. I did add smart tabs onto the transom which will help it plane better and be somewhat more stable. Do an internet search on Smart tabs and watch the video of the difference on the boat.

User avatar
Bermuda
Posts: 11
Joined: Tue Mar 11, 2014 8:36 pm
Location: Bermuda

Re: Flying Saucer Stability

Post by Bermuda »

Thanks ill look that up!

Think I will go with the plans as it's my first build but at least i know I have options.
Building a 12' Flying Saucer

boat-bill-der
Posts: 332
Joined: Mon Oct 23, 2006 3:26 pm
Location: Pleasant Hill, CA
Contact:

Re: Flying Saucer Stability

Post by boat-bill-der »

I'm a little late to reply, but I put a http://www.davisnet.com/marine/products ... ?grp=m18-2 on mine, and a 4' keel strip that starts at about 1" deep and tapers to about 2" at the stern and it handles great...

No porpoising, and it has a nice slide into turns until you hit the right degree of sideways and digs in... Kind like carving on a snowboard, I love it.

Post Reply

Return to “Small outboards”