Dan's Zip

Outboard designs up to 14'

Moderator: ttownshaw

bjfrater
Posts: 124
Joined: Sun May 04, 2014 9:13 pm
Location: Auckland, New Zealand

Re: Dan's Zip

Postby bjfrater » Thu Aug 06, 2015 3:04 pm

Some more...
Attachments
20141214_154006.jpg
20141214_121438.jpg
20141214_121448.jpg

dcarbone
Posts: 22
Joined: Tue May 19, 2015 6:34 am

Re: Dan's Zip

Postby dcarbone » Sun Aug 16, 2015 6:25 am

Thanks for the pictures they helped out !

rari
Posts: 25
Joined: Tue Jun 30, 2015 8:56 am
Location: Charleston, SC

Re: Dan's Zip

Postby rari » Mon Aug 17, 2015 7:51 am

dcarbone wrote:So far I have my frames all made up and some encapsulated in leaving the transom alone at the moment because I'm picking up a motor on Sunday and the guy is unsure if it a long or short
I picked up more African mahogany yesterday in 16' that's 5/4 thick for my keel and battens along with the chines and sheers so hope to build the building form this weekend and get it looking like a boat


Dan, your Zip is looking good. I'm in the process in building my Flying Saucer.

Do you happen to have any pictures of your frames laid out before placing the gussets? I'm curious on how you cut your frames. I'm assuming top and bottom frames are cut long and the sides are short.

Thanks!

Rari
Rari
Charleston SC
Newbie Boatbuilding a Flying Saucer
https://rarisboat.wordpress.com/

dcarbone
Posts: 22
Joined: Tue May 19, 2015 6:34 am

Re: Dan's Zip

Postby dcarbone » Thu Aug 20, 2015 10:11 am

yes I do I cut the top and bottoms of my frames I was going to leave those long but on some of the frames I realized there wouldn't be much wood left on the frame after the notch was cut I thought that might be weaker I guess it doesn't matter since the gussets with glue hold it all together
Attachments
IMG_1291.JPG


Return to “Small outboards”

Who is online

Users browsing this forum: No registered users and 12 guests