Where to find deck planking for squirt

Outboard designs up to 14'

Moderator: ttownshaw

User avatar
GiveATry
Posts: 15
Joined: Mon Mar 09, 2015 11:58 am
Location: Pittsboro, NC

Where to find deck planking for squirt

Postby GiveATry » Mon Jun 13, 2016 2:20 pm

I am nearing the point where I will be installing plank decking on my Squirt. I am Having some challenges finding mahogany in anything less than 1 inch thickness. Seems a lot of planing and waste to get to the thickness I need. Am I alone in this or have others experienced the same. Thank you!

User avatar
Bill Edmundson
Posts: 10314
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Where to find deck planking for squirt

Postby Bill Edmundson » Mon Jun 13, 2016 2:52 pm

I bought 8/4 and ripped it to 3/16".

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
DrBryanJ
Posts: 559
Joined: Fri Jul 22, 2011 6:05 am
Location: New Jersey

Re: Where to find deck planking for squirt

Postby DrBryanJ » Mon Jun 13, 2016 2:56 pm

I did the same. Bought 5/4 which I resawed and planed to 3/16.
Bryan

Building a malahini "Mona Lisa"

My wife said "If I build a boat, she's getting a divorce."

Steve S
Posts: 233
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Where to find deck planking for squirt

Postby Steve S » Mon Jun 13, 2016 3:26 pm

I did the same except I used a bandsaw and then planed them all the same thickness. They ended up about 5/16" thick. I think Bill's 3/16" is I better thickness.
Steve S
Squirt build

User avatar
Roberta
Posts: 5883
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Re: Where to find deck planking for squirt

Postby Roberta » Mon Jun 13, 2016 4:06 pm

Resawing and planing thicker material is the most common way. You will have to do this or find a place that will do it for you. Some specialty wood shops might be able to accommodate you. For a smaller boat like the Squirt, 1/8-3/16th inch would be best.
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

Hercdrvr
Posts: 343
Joined: Mon May 11, 2015 12:52 pm
Location: McKinney TX

Re: Where to find deck planking for squirt

Postby Hercdrvr » Mon Jun 20, 2016 6:46 am

I used D&D wood craft supplier, no complaints. I got exactly what I ordered.
I was able to order 12" wide mahogany for the curve of the decking.
Good luck and have fun, decking is my favorite part of construction.
Matt
Attachments
20150324_180757.jpg

User avatar
GiveATry
Posts: 15
Joined: Mon Mar 09, 2015 11:58 am
Location: Pittsboro, NC

Re: Where to find deck planking for squirt

Postby GiveATry » Tue Jun 21, 2016 9:39 am

Yes, I am looking forward to this part. Thank you all for the suggestions.

boat_before_planking2.JPG

User avatar
GiveATry
Posts: 15
Joined: Mon Mar 09, 2015 11:58 am
Location: Pittsboro, NC

Re: Where to find deck planking for squirt

Postby GiveATry » Tue Aug 02, 2016 8:00 pm

mine_planked.JPG
mine_planked.JPG (35.14 KiB) Viewed 2694 times


Update and more questions... was able to install planking on the deck of the Squirt. Am reasonably satisfied with how it looks.

Need to add "caulk" to the gaps and want to stain the planks as well but am not sure what sequence makes sense. Can I caulk between the planks with a white pigmented epoxy and then stain without the stain discoloring the "caulk"? Or, should I stain first and then caulk running the risk that I will create a mess that I can't sand away because the planks are already stained?

I am struggling with how to move forward from this point.

- Randy

JimmY
Posts: 482
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Where to find deck planking for squirt

Postby JimmY » Wed Aug 03, 2016 3:54 am

Check out sscobra's Monaco thread in the power boat forum, he's doing exactly what you want to do.

Looking nice, I hope to be there someday.

-Jim
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

User avatar
DrBryanJ
Posts: 559
Joined: Fri Jul 22, 2011 6:05 am
Location: New Jersey

Re: Where to find deck planking for squirt

Postby DrBryanJ » Wed Aug 03, 2016 4:05 am

Seems like the posts I've seen stain and finish boards first. Then tape over everything and caulk seams.
Bryan

Building a malahini "Mona Lisa"

My wife said "If I build a boat, she's getting a divorce."

User avatar
Bill Edmundson
Posts: 10314
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Where to find deck planking for squirt

Postby Bill Edmundson » Wed Aug 03, 2016 5:50 am

Do all you staining and coatings first. Caulking is the last step.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

jel1988
Posts: 9
Joined: Sat Jan 02, 2016 9:50 am
Location: Northern Ontario in the summer, coastal SC in the winter

Re: Where to find deck planking for squirt

Postby jel1988 » Sat Aug 06, 2016 5:31 pm

Try Noah's in Toronto I believe they ship to the US. They sell 1\8 African mahogany and it's not to expensive. Besides your dollar is worth at least a buck and a quarter here!

User avatar
Bill Edmundson
Posts: 10314
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Where to find deck planking for squirt

Postby Bill Edmundson » Sat Aug 06, 2016 6:28 pm

Rick at Noah's is a good guy!

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build


Return to “Small outboards”

Who is online

Users browsing this forum: craigvansickle and 12 guests