Tuffy Build

Outboard designs up to 14'

Moderator: ttownshaw

Evan
Posts: 18
Joined: Sun May 21, 2017 3:31 pm
Location: Nova Scotia, Canada

Re: Tuffy Build

Post by Evan » Fri Feb 23, 2018 4:38 pm

6 sounds good, thanks. I have not decided whether I was going to glass the deck or not, I will have a while to think about it.

Evan
Posts: 18
Joined: Sun May 21, 2017 3:31 pm
Location: Nova Scotia, Canada

Re: Tuffy Build

Post by Evan » Fri Oct 12, 2018 6:22 am

I did not work on the boat all summer.

In the last couple days I have worked a bit on fairing the frames. One side and the top are pretty close. I had some plywood clamped on and there were only a couple of spots that need to be looked at. I used a combination of a hand plane and belt sander which seemed to work.

Here is where it is at.
IMG_0537.jpg
IMG_0538.jpg
Seems I was a little sloppy with some epoxy.

Post Reply

Return to “Small outboards”