Monaco Restart

Designs for inboard or outboard power

Moderator: BruceDow

Brian
Posts: 171
Joined: Mon Feb 18, 2013 10:06 pm
Location: Hawaii

Re: Monaco Restart

Postby Brian » Sun Oct 22, 2017 10:54 am

Wow, Rich. What a great, simple idea. Should totally work. THANKS!

User avatar
speedracer
Posts: 145
Joined: Sun Jan 16, 2011 8:48 pm
Location: Covingtion, Louisiana

Re: Monaco Restart

Postby speedracer » Sun Nov 05, 2017 1:15 pm

The two layers of plywood are now complete. Beginning the finishing boards this week.
Attachments
IMG_6205.JPG
IMG_6204.JPG
IMG_6200.JPG
Great spirits have always encountered violent opposition from mediocre minds. Albert Einstien

Brian
Posts: 171
Joined: Mon Feb 18, 2013 10:06 pm
Location: Hawaii

Re: Monaco Restart

Postby Brian » Sun Nov 05, 2017 2:27 pm

Very close to my Monte Carlo in looks and progress. I am trying to do everything I can think of inside (construction, wiring, plumbing, etc) before putting the deck on. When you put the ply down, how did you make sure that a bunch of glue didn't muck everything up below? I was planning on using painters paper with the tape on the edge and just cover the entire underside of the battens and whatever. But maybe it can be done cleanly by just being light-handed with the epoxy? Or did you just get under there with acetone and a rag quickly?

User avatar
BayouBengal
Posts: 926
Joined: Tue Jul 31, 2007 7:29 am
Location: Baton Rouge, Louisiana

Re: Monaco Restart

Postby BayouBengal » Mon Nov 06, 2017 8:45 am

Looking fantastic, Chris!!!

User avatar
speedracer
Posts: 145
Joined: Sun Jan 16, 2011 8:48 pm
Location: Covingtion, Louisiana

Re: Monaco Restart

Postby speedracer » Mon Nov 06, 2017 2:22 pm

Brian, I placed old sheets and blankets first to catch immediate drips, then went under with a rag and wiped as needed. I also mixed the glue pretty thick to minimize drips and didn't get crazy with the amount. I'm not a fanatic over the interior that no one will ever see so It wasn't an issue.

Thanks Bayou Bengal.
Great spirits have always encountered violent opposition from mediocre minds. Albert Einstien

User avatar
mrintense
Posts: 2505
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Monaco Restart

Postby mrintense » Mon Nov 06, 2017 4:32 pm

It's always cool to see boats getting closer to the finish line. I'd say that this Monaco is going to look great when finished. Looks good now!. :D :D
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise named "Some Other Time"

Clipper's Vera Cruise Build

User avatar
speedracer
Posts: 145
Joined: Sun Jan 16, 2011 8:48 pm
Location: Covingtion, Louisiana

Re: Monaco Restart

Postby speedracer » Thu Nov 09, 2017 7:09 pm

So I am thinking about the windshield. Attached are two pics I took at this years Wooden Boat Festival in Madisonville, LA. I like this design of open sides. Can anyone who wishes to respond tell me where I can source parts like this or similar to?
Attachments
IMG_6051.JPG
IMG_6052.JPG
Great spirits have always encountered violent opposition from mediocre minds. Albert Einstien

User avatar
Rich Coey
Posts: 263
Joined: Fri Feb 02, 2007 10:44 pm
Location: Modesto, CA
Contact:

Re: Monaco Restart

Postby Rich Coey » Thu Nov 09, 2017 9:46 pm

http://www.californiaclassicboats.com/chris.htm
But they are crazy expensive. The style in your picture is almost $9000 dollars.
Sometimes they show up on ebay.

Rich

PeterG
Posts: 337
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: Monaco Restart

Postby PeterG » Fri Nov 10, 2017 2:57 pm

Yeah, anything parts related to a Chris Craft Continental is big bucks! Great look, though.
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

User avatar
speedracer
Posts: 145
Joined: Sun Jan 16, 2011 8:48 pm
Location: Covingtion, Louisiana

Re: Monaco Restart

Postby speedracer » Sun Nov 12, 2017 8:13 am

Wow! I'll have to go to plan B for the windshield then. No way did I have that much budgeted. Thanks.
Great spirits have always encountered violent opposition from mediocre minds. Albert Einstien

User avatar
Bill Edmundson
Posts: 10394
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Monaco Restart

Postby Bill Edmundson » Sun Nov 12, 2017 8:46 am

You might check with Hundley Chris Craft. They have tons of old parts. You might have to do some work to clean the stuff up. They are in Lake Houston TX.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

bob smith
Posts: 487
Joined: Thu Aug 21, 2008 6:59 am
Location: Chester, SC

Re: Monaco Restart

Postby bob smith » Sun Nov 12, 2017 3:21 pm

Check http://www.greatlakesskipper.com
They have a bunch of windshield stuff and some OEM windshields.
Bob Smith
Chester, SC

User avatar
BayouBengal
Posts: 926
Joined: Tue Jul 31, 2007 7:29 am
Location: Baton Rouge, Louisiana

Re: Monaco Restart

Postby BayouBengal » Sun Nov 12, 2017 6:29 pm

Chris, The owner of that boat is a guy named Walter Leggett who lives here in Baton Rouge. I'm friends with Walter and can give you his number and email if you'd like to talk with him. By the way, unlike many of the boats at Madisonville, Walter actually restored this boat himself and is a wealth of knowledge.

User avatar
speedracer
Posts: 145
Joined: Sun Jan 16, 2011 8:48 pm
Location: Covingtion, Louisiana

Re: Monaco Restart

Postby speedracer » Mon Nov 13, 2017 6:27 pm

Thanks everyone. I'll track down each suggestion.

Bayou Bengal - Yes, send me the contact information for Walter.
Great spirits have always encountered violent opposition from mediocre minds. Albert Einstien

User avatar
BayouBengal
Posts: 926
Joined: Tue Jul 31, 2007 7:29 am
Location: Baton Rouge, Louisiana

Re: Monaco Restart

Postby BayouBengal » Tue Nov 14, 2017 4:08 pm

Chris, I just sent you an email with Walter's info. Actually, I sent three with the first two emails being incorrect for Walter. Just give him a call, he said with some luck you may be able to get the continental frames for a couple of thousand.

But my question is this. Are you sure that they'll work on your boat, meaning is the deck curvature the same or near enough to the same on your boat as the CC Continental.


Return to “Power Boats”

Who is online

Users browsing this forum: Bing [Bot] and 11 guests