Chugalug's BoJest

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
chugalug
Posts: 1201
Joined: Sat Nov 29, 2014 5:01 pm
Location: top of mn.

Re: Chugalug's BoJest

Post by chugalug » Wed Dec 05, 2018 8:35 pm

:D Not much done to "Chug".got HIN # routered on outside of hull.Picked up a few extra parts-toilet with 9 gal waste tank attached.designed to be permanently installed.waste to be sucked out at waste disposal sites.hope it complies with Canadian regs
IMG_1072[1].JPG
Also got anchor winch and 20 lb anchor
IMG_1070[1].JPG
unsure how I'll mount that. :D
Working on regular-sized Bo-Jest


"If it's not crooked,It's not mine

footer
Posts: 72
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: Chugalug's BoJest

Post by footer » Thu Dec 06, 2018 4:42 am

I was just going back through your pictures and thought I'd compliment you on your work. Your center floor panel impressed me. I did a similar pattern in a cedar chest. The boat is looking Great. :)

User avatar
chugalug
Posts: 1201
Joined: Sat Nov 29, 2014 5:01 pm
Location: top of mn.

Re: Chugalug's BoJest

Post by chugalug » Thu Dec 06, 2018 6:15 am

:D Unsure if I'll leave the panel exposed as it is getting quite worn-I got a chunk of teal colored boat carpeting to cover the floor anyway.really cold in boat shed so haven't been in there much. :x
Working on regular-sized Bo-Jest


"If it's not crooked,It's not mine

Post Reply

Return to “Power Boats”