Malahini performance

Designs for inboard or outboard power

Moderator: BruceDow

PeterG
Posts: 674
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: Malahini performance

Post by PeterG » Wed Jun 12, 2019 5:28 am

Nicely done! Per the Malahini plans the spray rails run full length to the transom but the bottom edge of the spray rails are flush with and same angle as the bottom for the aft third or 2/5 of the hull length. Meaning what you installed is just exactly what you needed :)
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

Post Reply

Return to “Power Boats”