Aussie Belle

Designs for inboard or outboard power

Moderator: BruceDow

Post Reply
User avatar
Bill Edmundson
Posts: 11517
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:
Contact Bill Edmundson

Re: Aussie Belle

Post by Bill Edmundson » Sat Jul 06, 2019 2:24 pm

Jamie

Great to see! Now let's see her on the water!

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build
Top
User avatar
Aussie
Posts: 398
Joined: Wed Feb 10, 2010 4:31 pm
Location: Sarina Queensland Building 23ft Belle Isle

Re: Aussie Belle

Post by Aussie » Sat Jul 06, 2019 2:30 pm

Video of start up https://youtu.be/SGaij2_xApA
Top
User avatar
Aussie
Posts: 398
Joined: Wed Feb 10, 2010 4:31 pm
Location: Sarina Queensland Building 23ft Belle Isle

Re: Aussie Belle

Post by Aussie » Sat Jul 06, 2019 2:47 pm

Just working on covering the interior Bill and she is ready to go.
Top
User avatar
jenko
Posts: 907
Joined: Sat Mar 19, 2011 2:50 am
Location: Pine Mountain . Vic . Australia
Contact:
Contact jenko

Re: Aussie Belle

Post by jenko » Sat Jul 06, 2019 3:02 pm

sounds good Jamie :D
Top
User avatar
DrBryanJ
Posts: 924
Joined: Fri Jul 22, 2011 6:05 am
Location: Pompton Plains, NJ

Re: Aussie Belle

Post by DrBryanJ » Sun Jul 07, 2019 3:31 am

Aussie, She is stunning! When does she hit the water?
Bryan

Building a malahini "Mona Lisa"

My wife said "If I build a boat, she's getting a divorce."
Top
User avatar
Aussie
Posts: 398
Joined: Wed Feb 10, 2010 4:31 pm
Location: Sarina Queensland Building 23ft Belle Isle

Re: Aussie Belle

Post by Aussie » Sun Jul 07, 2019 3:51 am

Hi Doc,

Boat hits the water in 2 weeks for sea trials with the official launch the following weekend
Top
Tony Hain
Posts: 367
Joined: Fri Aug 26, 2011 3:01 pm
Location: Queensland Australia

Re: Aussie Belle

Post by Tony Hain » Sun Jul 07, 2019 6:19 pm

Hi Jamie
Curious as to what thickness you use for your back seat base.
Tony Hain
"Never under-estimate the bounds of human stupidity" (Robert Heinlein)
and on a more optimistic note "nor the capacity for human brilliance"
Top
User avatar
Aussie
Posts: 398
Joined: Wed Feb 10, 2010 4:31 pm
Location: Sarina Queensland Building 23ft Belle Isle

Re: Aussie Belle

Post by Aussie » Mon Jul 08, 2019 5:55 am

Hi Tony

I used 12 mm for all the seats including the back board and seat

I am covering the bases with carpet
Attachments
11272171-9623-4232-A2E5-36E8AE8E01D4.jpeg
EC28EC4D-1BB9-445F-BD02-DC7E20DEA0CF.jpeg
Top
JimmY
Posts: 775
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Aussie Belle

Post by JimmY » Mon Jul 08, 2019 9:54 am

She looks beautiful and sounds sweet!
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!
Top
User avatar
Aussie
Posts: 398
Joined: Wed Feb 10, 2010 4:31 pm
Location: Sarina Queensland Building 23ft Belle Isle

Re: Aussie Belle

Post by Aussie » Wed Jul 10, 2019 5:39 am

Floor and seat bases are now all covered and installed.

Top side panels and arm rests are in.

Next is the lower side panels and then onto the seats.
Attachments
08FFC65C-4A6F-46AA-8AFE-5E18D73CBDA7.jpeg
3A31DCDC-0FA4-4974-8B8E-4F281AC41636.jpeg
AA9D7CB9-3860-4048-BEA7-55EEDC70F6D8.jpeg
Top
User avatar
mrintense
Posts: 3239
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:
Contact mrintense

Re: Aussie Belle

Post by mrintense » Thu Jul 11, 2019 6:24 am

Getting close!!
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise

Clipper's Vera Cruise Build
Top
Ozzieboat
Posts: 254
Joined: Sun Jun 07, 2009 4:40 am
Location: Logan, Queensland, Australia

Re: Aussie Belle

Post by Ozzieboat » Thu Jul 18, 2019 4:05 am

Jamie
All the best for the launch on the weekend. The big moment has arrived. You're going to love it.
Alan
Top
User avatar
Bill Edmundson
Posts: 11517
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:
Contact Bill Edmundson

Re: Aussie Belle

Post by Bill Edmundson » Sun Jul 21, 2019 10:17 am

OH WOW! Has Jamie got a tale to tell!

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build
Top
User avatar
jenko
Posts: 907
Joined: Sat Mar 19, 2011 2:50 am
Location: Pine Mountain . Vic . Australia
Contact:
Contact jenko

Re: Aussie Belle

Post by jenko » Sun Jul 21, 2019 2:22 pm

Yes Bill read about it on the Glen L builders Facebook page :shock:
Good thing everyone survived
Top
neel thompson
Posts: 1320
Joined: Fri Oct 01, 2010 2:33 pm
Location: Collegeville, Pa

Re: Aussie Belle

Post by neel thompson » Sun Jul 21, 2019 4:43 pm

Now that was a bad day Jamie... It seems like it could have been much worse than it turned out. That "neutral safety switch" is a must have item !!!! Get well soon,,,, Neel
Top
Post Reply

Return to “Power Boats”