Doing IT ! / Little Hunk

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Sat Jun 23, 2012 1:20 pm

Sheer clamps going on.
Attachments
Sheer start 001.JPG

Seiner
Posts: 40
Joined: Thu Feb 26, 2009 10:05 am
Location: Mercer Island, WA

Re: Doing IT ! / Little Hunk

Postby Seiner » Fri Jul 06, 2012 12:51 pm

You are a machine! go, Man, go!

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Fri Jul 06, 2012 2:52 pm

Its way to hot ! its 115 in my tent :!: on sat. its going down in the mid 80s !so ill hit it hard on the weekend.

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Sun Jul 08, 2012 9:17 am

Inside lams. >Outer going on today. :D
Attachments
sheers2 004.JPG

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Mon Jul 09, 2012 12:21 pm

Lots of fairing to do! my frames and chine n sheers are looking like ill have no problems but my battons are showing lots of high n low spots. they warped abit ,thats part of building outside :!: aleast there not spliting :!:

Seiner
Posts: 40
Joined: Thu Feb 26, 2009 10:05 am
Location: Mercer Island, WA

Re: Doing IT ! / Little Hunk

Postby Seiner » Mon Jul 09, 2012 4:31 pm

Mike,
It is getting hot here as well!

Build fast, fish early! I stretched the Little hunk to 20'.

Seiner
Attachments
IMG_1265.jpg

Seiner
Posts: 40
Joined: Thu Feb 26, 2009 10:05 am
Location: Mercer Island, WA

Re: Doing IT ! / Little Hunk

Postby Seiner » Mon Jul 09, 2012 5:06 pm

Mike,
It is getting hot here in the Northwest too.

After stretching this little Hunk to 20', it finally got to hit the salt water and go through the locks.

Only took three years!

Build fast and fish early!
Attachments
2012-07-07_09-06-11_590.jpg
fianl sea trial 2.jpg
IMG_1265.jpg

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Mon Jul 09, 2012 11:06 pm

Looks FANTASTIC :!: :!: Lets see the fISH :!: :!: :D

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Mon Jul 09, 2012 11:09 pm

GREAT PICS>you should be proud !! great job :!:

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Thu Jul 19, 2012 3:26 am

Fairing :!: FINALLY :!: :!: :!: :!: :!: :!: :D
Attachments
frairing chines 003.JPG

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Fri Jul 20, 2012 4:45 am

Outer lams on the sheers and fairing everything ! FUN !
Attachments
bee 002.JPG

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Sat Jul 28, 2012 3:12 pm

:!: Buying my plywood next week :!: :D

User avatar
DaveLott
Posts: 3688
Joined: Sat Jul 04, 2009 3:50 pm
Location: Branson, MO
Contact:

Re: Doing IT ! / Little Hunk

Postby DaveLott » Sat Jul 28, 2012 6:22 pm

One step at a time. A bunch of little small projects and before long you have boat. Amazing stuff
Dave

Riviera build - the Midnight Cry Project
Glen-L Sea Kayak
Mahalo Standup Paddleboard

Video of Midnight in Action

Few things in the world measure up to the thrill and satisfaction of boating in a boat that you built.

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Sat Aug 18, 2012 6:48 pm

IM BACK :!: put one more 3/4 piece of ply on my transom today but im haveing some problems with fitting the ply on the bow. take a look and tell me something :!: :D there a gap on the stem as you see in the pic BUt when i took screws out of the forward chines and push the ply to the stem and it was gone. then a gap was present on the chines.
Attachments
BOW PLANKING 004.JPG
Last edited by svenole on Sat Aug 18, 2012 10:16 pm, edited 1 time in total.

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: Doing IT ! / Little Hunk

Postby svenole » Sat Aug 18, 2012 6:55 pm

Oh yea :!: if you wonder what my friend chris is doing he is leaning into the plywood not what your thinking :!: :lol:


Return to “Power Boats”

Who is online

Users browsing this forum: seadog07 and 18 guests