Go it in the water

Designs for inboard or outboard power

Moderator: BruceDow

Post Reply
funder13
Posts: 5
Joined: Mon Jun 21, 2010 1:29 pm
Location: Jacksonville Fl

Go it in the water

Post by funder13 »

We finished our Wee Hunk last month and put it in its element. We keep getting stopped by people asking what kind of boat it is, and educate them on the provenance of the boat - "my garage" and the builders - "my son and I". (We never fail to credit Glen-L, naturally.) Indeed, the comments have been largely favorable to ecstatic: "You built yourselves? I love you guys!" This from a guy fishing at the boat ramp... Indeed, in Northeast Florida's procession of white sided plastic boats, the blue hulls and dory lines are distinctive. We haven't decided on a name, but have a couple good options.

The boat performs well, keeping us dry and safe, and drives well, getting onto plane quickly.

We manufactured the sheers out of pieces cut from a 18' piece of 2x6 so we didn't have to scarf. We also changed the sheer pattern, making a "sandwich" of the plywood hull sides. My son stained it, with my forgetting that oil based stains are not compatible with epoxy...then he had to sand it all off when the epoxy didn't cover well.

The only real issue was painting the bottom - the process revealed that either 1) I can't paint (likely) or 2) the paints were not cooperating. My wife, enduring my torment over the bad painting, finally said, "Enough painting. We are going to flip the boat over Saturday." So we did.
My son sweeping the boat after sanding.
My son sweeping the boat after sanding.
The interior - asymmetrical consoles designed by my son.
The interior - asymmetrical consoles designed by my son.
On the water after a year.
On the water after a year.
We managed to ding the bottom when a roller on the trailer came apart, but no harm.


Sadly, after about 3 weeks of sea trials and use, the outboard we bought used has died. Back to Craigslist!

Jeff and Nathan Funderburk
Jacksonville Fl
Lucky 13 Marine Services, LLC

User avatar
jeffh
Posts: 1521
Joined: Thu Feb 25, 2010 10:34 am
Location: ATL Burbs and Lake Chatuge, GA

Re: Go it in the water

Post by jeffh »

Congratulations! It sure looks nice. With all the boats in FL, it has to make you feel good that yours gets singled out for complements and questions. Good show! BTW, hope you find a new engine.
2011 MALAHINI - KICKED IN THE HEAD
Image
I wake up with a 16ft woody every morning :)
Video: http://www.youtube.com/watch?v=534DBtp1Cnc
Website: https://sites.google.com/site/2011malahini/

User avatar
Roberta
Posts: 6771
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Re: Go it in the water

Post by Roberta »

Looks Great!!! What a wonderful feeling it must be to launch your new boat. Hopefully I will be doing that in a month.

Roberta :D :D :D
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

upspirate

Re: Go it in the water

Post by upspirate »

Looks great!

Get the same model motor, then you'll have spare parts.....it helps!! :wink:

khundley
Posts: 252
Joined: Fri Aug 13, 2010 11:12 am
Location: Wilmette, IL (Just outside Chicago)
Contact:

Re: Go it in the water

Post by khundley »

Great job, congrats on the launch!
Ken Hundley
http://www.nocturnalguitars.com

So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan


User avatar
DaveLott
Posts: 3688
Joined: Sat Jul 04, 2009 3:50 pm
Location: Branson, MO
Contact:

Re: Go it in the water

Post by DaveLott »

Wow - no wonder you got the looks

Now, the big question. It is not official until it debuts at the Gathering. That is the NEW rule.

So see you in September at Lake Nickajack

dave
Dave

Riviera build - the Midnight Cry Project
Glen-L Sea Kayak
Mahalo Standup Paddleboard

Video of Midnight in Action

Few things in the world measure up to the thrill and satisfaction of boating in a boat that you built.

User avatar
Onplane
Posts: 681
Joined: Mon May 10, 2010 5:05 am
Location: Dayton, Ohio

Re: Go it in the water

Post by Onplane »

Very nice. Looks very sleek!

User avatar
kens
Posts: 4921
Joined: Wed Nov 12, 2003 5:25 pm
Location: Coastal Georgia

Re: Go it in the water

Post by kens »

JACKSONVILLE!!!!!!
I gotta see this. :D :lol: :D
Oak is over rated, everything about it takes extra time; then it warps, splits or checks !!! :roll:

greg27
Posts: 2
Joined: Tue Mar 27, 2012 4:33 am

Re: Go it in the water

Post by greg27 »

about what was the cost on the boat?

red
Posts: 612
Joined: Wed Dec 16, 2009 3:54 pm
Location: Milner Ga.

Re: Go it in the water

Post by red »

congrats on the launch ! great job !

thinwater
Posts: 49
Joined: Mon Oct 27, 2008 5:15 am

Re: Go it in the water

Post by thinwater »

Looks great, I'm right behind you, took me a year and 2 months so far. Tell me how it feels on the water that first time. I can't wait.

cbrammer
Posts: 62
Joined: Wed Nov 23, 2011 7:50 am
Location: Traverse City, MI
Contact:

Re: Go it in the water

Post by cbrammer »

That is a very cool look boat you built. Gratz!
Charles Brammer

Post Reply

Return to “Power Boats”