Glen-L.com

Well back to the tahoe for a bit after a looooong pause.... Heres where I'm at today!

Had 3 coats of epoxy on it from before which i had stripped back the whole thing to bare wood cuz the fairing in some areas was horrible.... so faired it better, hit it with stain and this is the first coat again now

U live and learn!

I think I will use the first photo as my screensaver just gorgeous lines well done.

_________________
Malahini, SEAN-NÓS http://www.youtube.com/watch?v=Qd6vkPjEy4U
http://www.youtube.com/watch?v=8uDVzcVpdhc
crackerbox build http://s753.photobucket.com/albums/xx17 ... =slideshow

Hey fellas ... i just noticed today that my swim step is exactly where i need to drill the holes for the exhaust ports which is about 2 inches above setup level. How should i tackle this?

How low can the exhaust ports be?

*EDIT* dunno why the boat is looking pink here lol ya so thats not what it looks like really !

Cheers
Zane

Redo the step so it looks like an old Corvette or T-Bird with the exhaust going through it.

Roberta

_________________
Roberta
Built Zip "Oliver IV" and Super Spartan "Jimmy 70"

Bottom edge of exhaust thru hull opening should be about 1" above DWL. Don't know the constraints you're dealing with but you might be able to use an oval or racetrack shape to allow more clearance under the step.

Regards,

Steve Hansen

Go out the side and I am serious. That is one cool look.

Check out Butch Barto's "Innocence"

_________________
Dave

My Riviera build - the Midnight Cry Project

Video of Midnight in Action
Blog

Few things in the world measure up to the thrill and satisfaction of boating in a boat that you built.

Here's a photo and a link to Butch's boat in Customer Photos :

TAHOE 23 by Butch Barto, Clearwater, FL (3-07)

________________
Paul Kane
Kane Custom Boats
Chelsea, Quebec

Building the Glen-L Hot Rod : http://www.kanecustomboats.com

Yeah,,,go out the side.
Here is a link to exhaust tips that I have found.
http://www.corsaperf.com/media/pdf/Side ... 20Tips.pdf
.................
I got my 3" stainless custom bends from these guys, then I had a local guy do a tig weld, for my exhaust and exit tip
http://www.mandrelbendingsolutions.com/ ... StoreFront

_________________
God Bless our Troops; especially our Snipers

Wow thanx guys thats very nice!!

But dont i have the same problem of it being too low even if i had it exit thru the side cuz of the side swim step extensions??

Cheers

I'll be close to you at end of month. I going thru Dubai.

_________________
God Bless our Troops; especially our Snipers

Ah nice... a glen-l member in my neck of the woods!!