Aussie Riveria update

[Old aussie]

Hi,

Have finished the transom and attached some shots, have also added some gussets in the corners of the transom.


Old aussie Peter

[Oyster]

Very nice work...A point of note, if the wheels are the simple hard rubber ones on the dolly setup, you may want to upgrade them to some better ones such as the air filled ones or at minimum the larger ones thats used on scaffolding. The weight that you have now will increase to a point that most of the hard ones will flatten out or even crumble.

[vettepilot]

You do Nice Work Old Aussie

[Old aussie]

Oyster,

Thanks, If you have a look at the photo you will see that there are screw jacks that take the weight no weight on the casters.

Old aussie Peter

[Oyster]

Oyster,

Thanks, If you have a look at the photo you will see that there are screw jacks that take the weight no weight on the casters.

Old aussie Peter

I see that. But if you plan on rolling the boat and its setup around, rarely do those wheels survive, especially if there are tiny ball bearings in the hub mechanism. Good luck,,

[Old aussie]

Dave,

Jamie here (at the old mans house this weekend) how is your shed going and are you near ready to start building?

Will coming through that way at easter might call in if you are home...

Jamie

[DaveLott]

Looking like a Riviera already

[Roberta]

Looks Great!!!!

Roberta

[Old aussie]

Hi,

Have got some more done on Riviera, but I have a problen, I am finding that I cannot leave it alone, I am allready
starting to plan my next boat , A Rebel tug.

Old Aussie , Peter.

[Old aussie]

Rear photo ,

[jamundsen]

its a disease.

[Aussie]

Hi,

Looking good old man!

I need to get into it or you will be overtaking me!!!!

Jamie

[Roberta]

I get all goose bumpy when I see all those shears and battens all lined up and faired so nice!! Beautiful!!

Roberta

[BruceDow]

It looks great!

Keep the pictures coming.

Bruce.

[billy c]

.....so pretty are the lines of that boat
beautiful work!
-Billy