Monaco Caper

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
speedracer
Posts: 188
Joined: Sun Jan 16, 2011 8:48 pm
Location: Covingtion, Louisiana

Re: Monaco Caper

Postby speedracer » Mon May 21, 2018 6:19 pm

Looks awesome. I like the very dark wood on the deck.
Great spirits have always encountered violent opposition from mediocre minds. Albert Einstien

fredt
Posts: 162
Joined: Sun Jun 05, 2011 4:05 am
Location: Homosassa, FL

Re: Monaco Caper

Postby fredt » Tue Jun 05, 2018 5:45 am

Thank you!

User avatar
Milhouse
Posts: 311
Joined: Tue Mar 08, 2016 8:03 am
Location: San Diego, CA

Re: Monaco Caper

Postby Milhouse » Tue Jun 05, 2018 10:16 am

with the Velvet drive on the aft end (timing gear) end of the engine


Thanks for the pics, looks a lot like mine.

Does your bell housing mate to the oil pan? Did you have to custom fabricate it? If you look at mine the oil pan was cut to add a holes for the bell housing to mount too, I was wondering if that was standard or just a hack that the previous owner did to accommodate this velvet drive.

What is turning your water pump? Is there a gear in the timing cover?
Attachments
20170716_124909.jpg
Jim
16' Ski Boat Restoration
17' Overnighter Sloop

I'd rather have a $h!tty meal than an $h!tty resume because a totally awesome resume will feed me steak one day - Steve Poltz

fredt
Posts: 162
Joined: Sun Jun 05, 2011 4:05 am
Location: Homosassa, FL

Re: Monaco Caper

Postby fredt » Wed Jun 13, 2018 5:31 pm

Sorry for the delay. The bell housing , oil pan were on the original 283 engine I got with the velvet drive attached. It was originally a Flagship engine. Flagship is currently in Punta Gorda Florida. I have more photos which I can send which show the original 283. When I scrapped the 283 and went to a 350 , everything transferred easily since both SBC engines, and it was less expensive for me to build a 350 from my machine shop than try to redo the old 283, even though I had found an identical 283 block in much better shape.

The Jabsco water pump is gear driven from the cam . If I recall, there was also a separate belt driven water pump on the original engine I am not using. Just the Jabsco for my raw water system.

Since the Velvet Drive and housing bolt directly to the "front" of the engine, there is no timing cover. I have added a photo attachment. I have many old engine photos including the oil pan if you need them.
Attachments
027 (2016_05_03 21_01_32 UTC).JPG

fredt
Posts: 162
Joined: Sun Jun 05, 2011 4:05 am
Location: Homosassa, FL

Re: Monaco Caper

Postby fredt » Wed Jun 13, 2018 6:32 pm

Launch of the Miss Maggie:

https://youtu.be/Hk5gB-dGgTk

User avatar
sscobra
Posts: 520
Joined: Wed Oct 24, 2012 2:11 pm
Location: Dripping Springs, TX

Re: Monaco Caper

Postby sscobra » Wed Jun 13, 2018 9:43 pm

Congratulations on a great launch! Nice video. Skip
Built the Glen-L Monaco, 2016.

fredt
Posts: 162
Joined: Sun Jun 05, 2011 4:05 am
Location: Homosassa, FL

Re: Monaco Caper

Postby fredt » Thu Jun 14, 2018 4:11 am

Thank you !

User avatar
BarnacleMike
Posts: 1017
Joined: Wed Sep 21, 2011 7:47 am
Location: North Georgia / Chattanooga Area
Contact:

Re: Monaco Caper

Postby BarnacleMike » Thu Jun 14, 2018 1:40 pm

Congratulations on your launch of Miss Maggie! What a beautiful boat!
-Michael

Built Utility "Perseverance" — completed Aug 2016
Currently building a Zip
My Boatbuilding Blog: http://barnaclemikeboats.blogspot.com/
My Website of Boat Photos: https://michaelsmaddox.wordpress.com

JimmY
Posts: 663
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Monaco Caper

Postby JimmY » Thu Jun 14, 2018 6:49 pm

Nice job! Enjoy the Summer.
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

fredt
Posts: 162
Joined: Sun Jun 05, 2011 4:05 am
Location: Homosassa, FL

Re: Monaco Caper

Postby fredt » Sat Jun 16, 2018 5:00 am

Thank you all!

User avatar
Milhouse
Posts: 311
Joined: Tue Mar 08, 2016 8:03 am
Location: San Diego, CA

Re: Monaco Caper

Postby Milhouse » Sat Jun 16, 2018 10:44 am

Fred - Great job on the boat!!!! Glad to see that the launch went well

Your launch video was very well done as well!

The Jabsco water pump is gear driven from the cam
That is a very cool setup that is drastically different than mine. I think your looks very nice!
Jim
16' Ski Boat Restoration
17' Overnighter Sloop

I'd rather have a $h!tty meal than an $h!tty resume because a totally awesome resume will feed me steak one day - Steve Poltz

User avatar
Milhouse
Posts: 311
Joined: Tue Mar 08, 2016 8:03 am
Location: San Diego, CA

Re: Monaco Caper

Postby Milhouse » Sat Jun 16, 2018 10:48 am

Fred - Do you have a schematic showing how you routed the raw water in and out of the engine and exhaust manifolds that you can share?
Jim
16' Ski Boat Restoration
17' Overnighter Sloop

I'd rather have a $h!tty meal than an $h!tty resume because a totally awesome resume will feed me steak one day - Steve Poltz

User avatar
mrintense
Posts: 2886
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Monaco Caper

Postby mrintense » Sat Jun 16, 2018 3:05 pm

Congratulations on the successful launch Fred. Always nice to see another boat make it to the water. She look's beautiful. Nice video by the way.
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise named "Some Other Time"

Clipper's Vera Cruise Build

fredt
Posts: 162
Joined: Sun Jun 05, 2011 4:05 am
Location: Homosassa, FL

Re: Monaco Caper

Postby fredt » Mon Jun 25, 2018 5:12 am

Thank you Carl!

fredt
Posts: 162
Joined: Sun Jun 05, 2011 4:05 am
Location: Homosassa, FL

Re: Monaco Caper

Postby fredt » Mon Jun 25, 2018 5:38 am

Millhouse,

Here is some information on the thermostat I installed with my Barr Headers on the SBC engine. My first raw water routing didn't work well so went back to the drawing board. I thought I had some photos to share but will send later as going to boat today and will take some for you.

The following link is to what and where I purchased a new thermostat kit: http://www.hardin-marine.com/p-73955-po ... chevy.aspx . There is a pdf instruction sheet also at that product site.

But I will send a detail later today or tomorrow to you.


Return to “Power Boats”

Who is online

Users browsing this forum: No registered users and 13 guests