spray rails.rub rails.

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

spray rails.rub rails.

Post by svenole » Wed May 29, 2013 3:49 pm

Im drilling holes in my boat again :!: installing the spray rail........how do you keep water out there? my plans state not to glue it so........ :?:
Attachments
pic793-2.jpg
pic793-2.jpg (29.16 KiB) Viewed 5231 times

User avatar
Bill Edmundson
Posts: 11817
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: spray rails.rub rails.

Post by Bill Edmundson » Wed May 29, 2013 3:54 pm

Caulk. Don't use 3M5200 it's too strong. I used 4200. It may be too strong also. But, that is what I used.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: spray rails.rub rails.

Post by svenole » Wed May 29, 2013 3:56 pm

chalk in the screw holes ?or along the whole spray rail edge?

Cutwaterguy
Posts: 77
Joined: Sun Jun 06, 2010 4:02 pm

Re: spray rails.rub rails.

Post by Cutwaterguy » Wed May 29, 2013 5:05 pm

i see ur using stem bead applied to ur stem. what material, size and where did u get it? i get some of request of it, which i don't handle. thanks.

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: spray rails.rub rails.

Post by svenole » Wed May 29, 2013 10:43 pm

WAA?

:?:

User avatar
Bill Edmundson
Posts: 11817
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: spray rails.rub rails.

Post by Bill Edmundson » Thu May 30, 2013 5:30 am

Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: spray rails.rub rails.

Post by svenole » Thu May 30, 2013 3:30 pm

talking about the wood strips on bottom and middle.........spray n rubrails :!: :!: :!: :!:

Seiner
Posts: 40
Joined: Thu Feb 26, 2009 10:05 am
Location: Mercer Island, WA

Re: spray rails.rub rails.

Post by Seiner » Sat Jun 01, 2013 9:06 pm

Svenole,

I used Sikaflex Lifecaulk and ran beads down each side of the strip so I have a little bead of push-out.

Seiner

Cutwaterguy
Posts: 77
Joined: Sun Jun 06, 2010 4:02 pm

Re: spray rails.rub rails.

Post by Cutwaterguy » Sun Jun 02, 2013 6:32 am

thank you bill. the old stuff i'm familiar with was solid halfround. about 1/2 wide and maybe a strong1/4" thick. u have any links for this? i use to beable to get it made of stainless, chris craft used alot chrome plated bronze half round after they stopped offering c-waters.

User avatar
Bill Edmundson
Posts: 11817
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: spray rails.rub rails.

Post by Bill Edmundson » Sun Jun 02, 2013 6:46 am

Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

fredt
Posts: 162
Joined: Sun Jun 05, 2011 4:05 am
Location: Homosassa, FL

Re: spray rails.rub rails.

Post by fredt » Sun Jun 02, 2013 6:51 am

http://tacomarine.com/cgi-bin/ccp51/cp-app.cgi

I think it is Taco's number S11-450 for the solid 1/2". SS type 304. They make many widths. I Picked up the catalog at West Marine the other day.

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: spray rails.rub rails.

Post by svenole » Mon Jun 03, 2013 11:26 am

Hard bending wood and drilling and screwing.........think ill go with 2> -1/2 inch pieces and laminate them.it really isn't worth it. :!: :x by the way this isnt my boat....... just using it for an example of what im doing.

Cutwaterguy
Posts: 77
Joined: Sun Jun 06, 2010 4:02 pm

Re: spray rails.rub rails.

Post by Cutwaterguy » Mon Jun 03, 2013 2:21 pm

Not ur boat pictured..... oh well, never mind.

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: spray rails.rub rails.

Post by svenole » Tue Jun 04, 2013 12:10 pm

Waa :?:

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

Re: spray rails.rub rails.

Post by svenole » Wed Jun 05, 2013 11:52 pm

UR ? :lol:

Post Reply

Return to “Power Boats”